Timedora
Free Online Flashcard Deck

Live Sound Essentials Free Online Flashcards

Study Live Sound Essentials with 12 free online flashcards. Review key terms, definitions, and concepts with this interactive flashcard deck.

12 cards
01
Front

What creates the feedback loop in a live sound system?

Back

Feedback occurs when a microphone picks up sound from a loudspeaker, the system amplifies it, and the loudspeaker sends it back to the microphone.

02
Front

How do common uses of dynamic and condenser microphones differ?

Back

Dynamic microphones are commonly used for handheld vocals and loud sources. Condenser microphones are often chosen for detailed pickup and may need phantom power; check equipment requirements before switching it on.

03
Front

How do reverb and delay differ?

Back

Reverb adds reflections that suggest an acoustic environment; delay repeats a sound after a short interval.

04
Front

What does input gain control, and how should it be set?

Back

Gain or trim sets the incoming signal level; the channel fader controls that channel’s level in the mix. Set gain for a strong, clear signal without clipping, then use faders and output controls to shape the mix.

05
Front

What does an auxiliary send do?

Back

An auxiliary send routes a chosen amount of a channel to a monitor or effects processor.

06
Front

What information makes a sound cue repeatable?

Back

A cue list records the cue name or number, trigger point, action, and any timing or fade information, making the cue easier to identify and repeat.

07
Front

How should playback material be prepared before a performance?

Back

Prepare and label files, check that the playback device connects to the intended mixer inputs, test levels before the performance, and keep a backup plan for essential material.

08
Front

How can microphone placement favor the intended source over room noise?

Back

Place a microphone as close as practical to its intended source and aim it toward the desired sound. Close placement strengthens the desired sound relative to room noise.

09
Front

How do sound design and sound operation serve a performance?

Back

The designer selects or creates sounds and plans their timing and placement to support the storytelling, coordinating with the director and other departments. The engineer or operator prepares and runs equipment and cues.

10
Front

What is the basic signal path in a live sound system?

Back

A basic path is source → microphone or playback device → mixer → amplifier or powered speaker → audience. The mixer controls input level, tone, routing, and output volume.

11
Front

What practices help reduce microphone feedback risk?

Back

Keep microphones close to their intended sources, away from loudspeakers where practical, use directional microphones appropriately, and open only the microphones needed.

12
Front

What should guide sound choices and timing in a performance?

Back

Begin with what the audience should hear and whether sounds should be realistic, atmospheric, musical, or surprising; then select or create sounds and plan their timing and placement to support the storytelling.