Timedora

Estimating Crop Water Use Through the Season

Learn how reference evapotranspiration and a crop coefficient estimate crop water use, and why that use changes across the growing season.

Estimate water use across crop growth

Estimate water use across crop growth

Crop water use is mainly : water evaporating from soil and plant surfaces, plus water transpired by plants. A common way to estimate a crop’s evapotranspiration is:

ETc=Kc×ETo\mathrm{ETc}=K_c\times\mathrm{ETo}

ETo is reference evapotranspiration based on weather. The crop coefficient, Kc, adjusts that reference estimate for the crop and its growth stage. Thus, the estimate reflects both weather and the crop’s changing development; it is not a single fixed water requirement for the whole season.

In general, crop water use is lower after planting. As the canopy develops, use rises and is often greatest when the crop is fully developed. It then declines as the crop matures. These are broad seasonal patterns, not a claim that every crop follows an identical curve: water use also changes with weather, crop type, and canopy size.

This timing matters for water management. A shortage during a sensitive growth stage can reduce yield or quality. So when considering crop water use, account not only for how much may be needed, but also for how demand changes as the crop grows and when shortages could be especially consequential.

  • : Evapotranspiration associated with a crop, commonly estimated as ETc = Kc × ETo.