Timedora

Work, Energy, Power, and Momentum in Sport

A lesson on how work, energy, power, momentum, and impulse describe related but distinct aspects of movement in sport and exercise.

Work and the changing forms of mechanical energy

Work depends on force and displacement

In physics, a force does mechanical work on an object when it acts through a displacement. For a constant force,

W=Fdcos⁡θ,W=Fd\cos\theta,

where FF is the force magnitude, dd is the displacement, and θ\theta is the angle between them. Only the force component along the displacement contributes: work is positive when that component points with the displacement, negative when it points against it, and zero when the force is perpendicular to the displacement. If force varies along the path, the work is accumulated as W=∫F⃗⋅dr⃗W=\int \vec F\cdot d\vec r. Work is measured in joules: 1 J=1 N⋅m1\,\text{J}=1\,\text{N}\cdot\text{m}.

The lifting example shows why physics work is not the same as everyday effort. When a person raises a weight, the lifter’s upward force and the weight’s upward displacement are aligned, so the lifter does positive work on the weight. While lowering it under control, the lifter still applies an upward force, but the weight moves downward; that force does negative work. During a motionless hold, the lifter may exert effort, but the weight has no displacement, so no mechanical work is done on the weight during the hold.

Work, kinetic energy, and potential energy

Kinetic energy is energy of motion, and gravitational potential energy is associated with height relative to a chosen reference. For an ideal spring, potential energy is associated with its deformation:

KE=12mv2,PEg=mgh,PEs=12kx2.KE=\frac12 mv^2,\qquad PE_g=mgh,\qquad PE_s=\frac12 kx^2.

Here, mm is mass, vv is speed, gg is gravitational acceleration, and kk and xx are the stiffness and deformation of the spring. The work–energy principle says that net work changes an object’s kinetic energy:

Wnet=ΔKE=12m(vf2−vi2).W_{\text{net}}=\Delta KE=\frac12m(v_f^2-v_i^2).

In a jump, muscular work during push-off increases the body’s kinetic energy. As the athlete rises, some kinetic energy is converted into gravitational potential energy. During landing, muscles and other tissues do negative work as they absorb mechanical energy and help reduce the body’s motion. Mechanical energy is not necessarily conserved within the moving body: it can be transferred to the surroundings or transformed into heat and other forms.

Power: how quickly work is done

Power measures a rate

Power describes how quickly work is done or energy is transferred. Average power over an elapsed time is

Pavg=WΔt,P_{\text{avg}}=\frac{W}{\Delta t},

while instantaneous power is P=dWdt=F⃗⋅v⃗P=\frac{dW}{dt}=\vec F\cdot\vec v. The latter relates the force to the object’s velocity at a particular instant. Power is measured in watts, with 1 W=1 J/s1\,\text{W}=1\,\text{J/s}.

For the same amount of work, doing it in less time means greater average power. For example, climbing the same stairs quickly requires a greater rate of increasing gravitational potential energy than climbing them slowly. Power is therefore useful for describing explosive sport actions such as sprint starts, jumps, and throws.

Impulse, momentum, and sport collisions

Momentum and impulse are vectors

Linear momentum is mass times velocity:

p⃗=mv⃗.\vec p=m\vec v.

Because velocity has direction, momentum has direction too; its SI unit is kg⋅m/s\text{kg}\cdot\text{m/s}. Impulse describes the effect of a force acting over time. For a changing net force,

J⃗=∫titfF⃗net dt=Δp⃗.\vec J=\int_{t_i}^{t_f}\vec F_{\text{net}}\,dt=\Delta\vec p.

If the net force is constant, or represented by its average value, this becomes J⃗=F⃗avgΔt\vec J=\vec F_{\text{avg}}\Delta t. Thus, changing momentum requires an impulse, and direction matters when describing that change.

Applying impulse–momentum in sport

A sprinter gains forward momentum by pushing against the ground; a ball gains momentum when struck by a bat or racket. During landing, the momentum change still requires an impulse. Bending the knees and hips increases the time over which momentum is reduced; for a given momentum change, spreading the impulse over more time lowers the average net force. It does not eliminate the impulse needed to change the momentum.

Momentum is conserved for a system when the net external impulse on that system is zero. This can be a useful approximation for a brief sport impact, but ground interactions and other external forces may mean the collision system is not fully isolated. So whether momentum is conserved depends on the chosen system and the external impulse it experiences.