What control is required before servicing or clearing waste-handling equipment?
Before servicing or clearing equipment, isolate hazardous energy and apply lockout/tagout procedures as required by applicable safety rules.
Study Waste Collection and Handling with 12 free online flashcards. Review key terms, definitions, and concepts with this interactive flashcard deck.
What control is required before servicing or clearing waste-handling equipment?
Before servicing or clearing equipment, isolate hazardous energy and apply lockout/tagout procedures as required by applicable safety rules.
How should storage capacity relate to the collection interval?
Provide enough capacity for the expected waste volume during the collection interval; otherwise, containers may overflow before pickup.
What is the primary function of a waste transfer station?
A transfer station receives waste from collection vehicles, consolidates it, and reloads it into larger vehicles for onward transport.
What must automated or semi-automated curbside collection have?
Automated and semi-automated collection can reduce repeated manual handling, but requires compatible carts and vehicle access.
How should collection workloads be balanced across routes?
Balance routes by time, volume, number of stops, and difficulty—not just geographic area.
How should workers reduce struck-by risks around collection vehicles?
Keep workers out of blind spots and away from moving or raised equipment; use established communication signals rather than assuming a driver sees them.
How should planners assess the cost value of a transfer station?
Compare collection-vehicle travel to the station plus transfer and long-haul costs with the cost of hauling directly to the destination.
Where should waste containers be placed?
Place containers for safe access without blocking sidewalks, roads, exits, or emergency access.
What should managers review to improve collection routes?
Compare planned and actual travel time, tonnage, missed pickups, vehicle capacity, and delays; revise routes as conditions change.
What distinguishes single-stream from separated collection?
Single-stream collection gathers materials together; separated collection uses distinct containers or vehicle compartments.
What factors should determine collection vehicle size and configuration?
Match vehicle size and configuration to the amount collected per stop, number of stops, road access, and materials carried.
Why should stored waste be contained and sometimes covered?
Contain materials and cover them where appropriate to limit litter, pests, odors, and exposure to rain.
A practical introduction to architectural thinking that connects space, form, structure, materials, culture, environmental performance, and evidence-based building analysis.
An introduction to behaviorism’s focus on observable behavior and environmental conditions in learning.
A practical introduction to tracking chemical mass and concentration through environmental compartments, from basic balances to time-dependent estimates.
An introduction to life-cycle assessment as a four-phase method for comparing potential environmental impacts across infrastructure options.
Focused study of infrastructure life cycles, resilience and environmental performance.
Focused study of concentrations, chemical fate and reactions in environmental systems.
Focused study of site assessment and soil and groundwater remediation concepts.
Focused study of wastewater characteristics, treatment stages and discharge concepts.
Focused study of water quality, treatment stages and drinking-water systems.
Covers population health, epidemiology basics, prevention, health disparities, environmental health, health systems, and public health interventions.
Covers population health, epidemiology basics, prevention, health disparities, environmental health, health systems, and public health interventions.
Covers sustainable development, energy, resources, climate, waste, food systems, economics, environmental justice, and sustainability frameworks.