Timedora

4 Personal Protective Equipment

Learn how to select, put on, use, and remove personal protective equipment according to anticipated exposure and required precautions.

Purpose and precaution levels

is wearable equipment that reduces exposure to infectious materials. Choose it according to the task, anticipated exposure, and required precautions—not simply according to the patient’s diagnosis. PPE does not replace hand hygiene or other infection-control practices.

apply to every patient. Add contact, droplet, or airborne precautions when indicated by the patient’s condition and facility policy.

Selecting protective equipment

Select each item for the exposure expected during the task:

  • Gloves: Wear them when contact with blood, body fluids, mucous membranes, nonintact skin, or contaminated equipment is anticipated. Change them if damaged or contaminated, between patients, and when moving from a contaminated task or body site to a clean one. Gloves do not replace hand hygiene.

  • Gown: Wear one when clothing or exposed skin could contact infectious material. Choose a gown that covers the torso and arms and provides enough coverage for the task.

  • Mask: A medical or procedure mask protects the nose and mouth from splashes and sprays, and may be required for droplet precautions. It does not seal tightly and is not a respirator.

  • Respirator: Use the respirator required by the applicable precautions and workplace respiratory-protection program. A fit-tested N95 or higher-level respirator is used when indicated for airborne hazards. It must fit closely, and a is required each time it is put on.

  • Eye protection: Use goggles or a face shield when splashes or sprays could reach the eyes. A face shield alone may not provide the same coverage as goggles and a mask, so select protection appropriate to the exposure and protocol.

A task likely to splash body fluids may call for gloves, a gown, a mask, and eye protection. Care requiring airborne precautions calls for the specified respirator and any additional PPE required by those precautions.

Putting PPE on

Follow the facility’s sequence and the manufacturer’s instructions. A common donning sequence is:

  1. Prepare: Gather the correct PPE, inspect it for damage, and perform hand hygiene.

  2. Gown: Put it on and fasten it so it covers the torso and arms and wraps around the back.

  3. Mask or respirator: Secure it, shape the nosepiece, and ensure it covers the nose and chin. For a tight-fitting respirator, perform the required . A seal check does not replace ; OSHA requires medical evaluation and for tight-fitting respirators used at work.

  4. Eye protection: Put on goggles or a face shield and adjust it for coverage without disturbing the mask or respirator seal.

  5. Gloves: Put them on last, extending the cuffs over the gown sleeves.

If equipment does not fit, is damaged, or interferes with another item, stop and correct the problem before patient care. Keep hands away from the face and limit contact with nearby surfaces.

Using and changing PPE

Use PPE only for the task and patient for which it was selected. Avoid touching the face or adjusting the front of a mask or respirator. Change gloves when indicated; do not wash or reuse disposable gloves. If PPE becomes torn, wet, or heavily contaminated, replace it safely.

Clean and disinfect reusable eye protection according to facility instructions. Do not reuse disposable items unless an approved protocol and the manufacturer’s instructions allow it. Perform hand hygiene when indicated, including after glove removal and between patients.

Removing PPE safely

The outside of gloves, gowns, and eye protection—and the front of a mask or respirator—may be contaminated. During , remove items slowly and touch only the least-contaminated surfaces. Follow the facility’s procedure because the exact sequence and removal location can vary by PPE and precaution.

A common removal sequence is:

  1. Gloves: Grasp the outside of one glove with the other gloved hand and peel it off. Slide the fingers of the ungloved hand under the remaining glove cuff and peel it off without touching its outside.

  2. Gown: Untie or unfasten it, pull it away from the body, and turn contaminated surfaces inward as it is removed. Discard it in the designated container.

  3. Eye protection: Remove it by the headband or earpieces, not the front. Reprocess or discard it as directed.

  4. Mask or respirator: Remove it by the ties or straps only; do not touch the front. When airborne precautions apply, remove the respirator at the location specified by facility protocol—often after leaving the patient-care room and closing the door.

  5. Hand hygiene: Clean hands after PPE removal. If hands become contaminated during removal, perform hand hygiene immediately and continue according to facility procedure.

If PPE is removed in stages, follow the designated sequence and location carefully. Seek help or an observer when the procedure or level of risk requires it.