Mac Networks and Connected Devices
A practical guide to connecting Mac networks and accessories, configuring devices, and tracing common connection problems.
Connect to Wi-Fi and Bluetooth
Join and manage Wi-Fi
To join a network, open Apple menu > System Settings > Wi-Fi, turn Wi-Fi on, select the network, and enter its password. If the network is hidden, choose Other and enter its name and security details. The Wi-Fi menu in the menu bar or Control Center provides a quicker way to join.
Wi-Fi settings also let you manage known networks, change whether a network joins automatically, or forget it. For example, if a Mac keeps joining a weak network, turn off automatic joining for that network or choose Forget This Network, then connect to the preferred network.
Tell Wi-Fi connection from internet access
If the Mac has trouble joining Wi-Fi, confirm that Wi-Fi is on and that the correct network and password are being used. In System Settings > Network, check whether the relevant network service shows as connected.
If the Mac joins Wi-Fi but websites do not load, its connection to the network or router may be working even though the router or internet service is not. Check whether other devices can access the internet, and restart the router if appropriate. For deeper analysis, hold Option while clicking the Wi-Fi menu and choose Open Wireless Diagnostics. Its analysis does not change network settings.
Pair Bluetooth devices
Turn on the accessory and put it in discoverable or according to its instructions. On the Mac, open System Settings > Bluetooth, find the accessory, and click Connect. Accept a prompt or enter a pairing code if asked. If it does not appear, check that it is powered, nearby, and in . If it appears but will not reconnect, select it and connect again; if necessary, choose Forget and pair it anew. Bluetooth audio devices may also need to be selected in System Settings > Sound, under Output or Input.
Add and Troubleshoot Printers
Add a printer
Open System Settings > Printers & Scanners to add or manage printers. For a Wi-Fi printer, first make sure the Mac and printer are on the same network. Choose Add Printer, Scanner, or Fax, select the printer, and click Add. Many network printers support , which allows macOS to print without a separate driver. If a network printer is not listed, it may be possible to add it by , provided you know its address and supported printing protocol. Connect a USB printer by cable; a Bluetooth printer must be ready to pair.
Work through common printing problems
If a printer is missing or does not print, check that it is powered on, has paper and supplies, and shows no error. Confirm its network connection, wait briefly after powering it on, and check the print queue. For example, if a Wi-Fi printer is on a different network from the Mac, reconnect the printer to the Mac’s network before trying to add it again.
If these checks do not resolve the problem, remove and add the printer again if necessary, or obtain current printer software from the manufacturer.
Displays and Other Peripherals
Set up an external display
Connect the display using a compatible port, cable, and adapter. In System Settings > Displays, choose the resolution, brightness, arrangement, and whether to extend or mirror the desktop. The number and types of displays a Mac can use depend on its model, so check the model’s specifications when planning a multi-display setup.
If a display is dark or missing, check its power and selected input, then reseat the cable. Verify that the cable and adapter support the display’s resolution and refresh rate. If the display is connected through a hub, try connecting it directly to the Mac. In Displays settings, hold Option to reveal Detect Displays. Also allow the display to connect if macOS prompts for accessory approval.
Check other peripherals
USB, Thunderbolt, storage, audio, and other accessories can have different requirements. Depending on the device, it may need a particular port, cable, adapter, external power supply, or manufacturer software. Check the accessory’s instructions. Connecting it directly to the Mac can rule out a hub or device chain; current software or firmware may also be needed.
On a Mac laptop with Apple silicon, macOS may request permission before a new USB, Thunderbolt, or SD-card accessory connects. Unlock the Mac and approve the accessory if appropriate.
If a device is still not recognized, open by holding Option while choosing Apple menu > , then check whether the device appears under Hardware. If it appears but does not work, the problem may be with the accessory, its software, or its configuration rather than basic detection.
A Methodical Troubleshooting Sequence
Troubleshoot in a useful order
When a Mac connection or accessory fails, work from basic readiness checks toward more specific diagnosis:
Check that the accessory or network equipment is powered on and ready.
Verify the relevant details: the correct , Bluetooth , port, cable, adapter, or display input.
Disconnect and reconnect the device. If a hub is involved, test a direct connection.
Check the relevant System Settings pane and look for prompts or error messages.
Restart the accessory or Mac. Then check for macOS updates and manufacturer software or firmware when appropriate.
Use a suitable diagnostic to narrow down the cause: Wireless Diagnostics for Wi-Fi, to check whether a peripheral is detected, or the device’s own status indicators.
These checks help distinguish a connection problem from a device or service problem. For example, a device appearing under Hardware in means it is detected, but does not guarantee that it will work; the accessory, its software, or its configuration may still be at fault.
: A wireless connection between the Mac and a router.
: A deliberate series of checks used to locate where a connection or accessory problem occurs.