Free Practice Quiz Question List

3 Memory and RAM Online Quiz Questions

Use this free practice quiz with 20 questions to review 3 Memory and RAM, test your knowledge, and prepare for your next test or exam.

20 questions

True or false

1 point

True or false: A RAM module is guaranteed to run at its advertised data rate whenever it fits the computer’s memory slot.

A
True
B
False

Choose one

1 point

A computer supports both installed RAM modules, but they have different advertised data rates. What is a reasonable expectation for their operating speed?

A
Both modules must always run at the faster module’s advertised rate.
B
The system may run them at a common supported speed, often limited by the slower module.
C
The faster module automatically changes the slower module’s hardware rating.
D
The system must disable all memory channels.

Written response

1 point

What acronym names the computer’s power-on self-test?

Fill in the blank

1 point

When installing a RAM module, align its notch with the slot before pressing it into place.

True or false

1 point

True or false: An ECC-capable processor alone is enough to ensure that a computer can use ECC memory.

A
True
B
False

Choose one

1 point

Two RAM modules have different data rates and CAS latency (CL) values. How should you use the CL values when comparing their overall memory performance?

A
Choose the module with the lowest CL number; that proves it is faster overall.
B
Ignore data rate and compare only the module capacity.
C
Compare CL alongside data rate and other timings.
D
Choose the module with the highest CL number.

Choose all

1 point

Which actions are recommended when preparing to install RAM? Select all correct choices.

A
Shut down the computer and unplug it from power before handling memory.
B
Force the module into the slot if its notch does not line up.
C
Use a static-safe work area and discharge static electricity before touching internal parts.
D
Hold the module by its edges rather than touching its contacts or chips.
E
Touch the module contacts to check whether they are clean.

Written response

1 point

What abbreviation identifies the DIMM type that uses a register to reduce the electrical load on the memory controller?

Fill in the blank

1 point

A memory diagnostic reports an error. This indicates instability, but it does not by itself prove that the RAM stick is the only .

Choose one

1 point

A computer becomes unstable shortly after you enable an XMP or EXPO memory profile. What is the most appropriate first settings-related step?

A
Increase the profile settings further to test the system’s limits.
B
Disable the profile or restore firmware defaults.
C
Replace the processor immediately.
D
Reseat the memory while the computer is powered on.

Choose all

1 point

You are checking whether a RAM module is compatible with a particular computer. Which specifications should you verify against the computer’s documentation? Select all correct choices.

A
Confirm the DDR generation and DIMM or SO-DIMM form factor.
B
Check supported capacity and module type, such as UDIMM or RDIMM.
C
Select a module based only on its lowest CAS latency value.
D
Check whether ECC is supported by the module, processor, and motherboard as needed.
E
Check the system’s supported data rates.

Open ended

1 point

After installing a RAM module, what should you expect during the first boot, and how can you verify that the computer detects the upgraded memory?

Choose one

1 point

A consumer system supports two memory channels. Which installation choice can enable dual-channel operation and increase available bandwidth?

A
Install the pair in any slots; the slot order never matters.
B
Install a matched pair in the recommended slots to enable dual-channel operation, if supported.
C
Use two different DDR generations to increase bandwidth.
D
Install one module and leave all other supported channels unused.

Choose one

1 point

A computer takes longer than usual on its first boot after a RAM change, but then starts normally. What is one explanation consistent with normal operation?

A
The module must be removed and reinstalled immediately.
B
The computer has permanently lost its memory settings.
C
The system may be training or checking the memory.
D
The memory must be incompatible because every first boot should be instantaneous.

Choose one

1 point

Which statement correctly distinguishes RAM from an SSD or hard drive?

A
RAM retains files without power, so it can replace an SSD.
B
RAM is temporary working memory; an SSD or hard drive stores files persistently.
C
RAM is a type of permanent storage that remains available after shutdown.

Written response

1 point

What type of memory does a processor use in small amounts for very fast cache?

True or false

1 point

True or false: An ECC-capable processor alone guarantees that a computer can use ECC memory.

A
True
B
False

Choose one

1 point

A server requires memory modules that use a register to reduce the electrical load on its memory controller. Which module type should you check for?

A
UDIMM
B
RDIMM
C
SO-DIMM
D
LPDDR

Choose one

1 point

A computer supports memory up to 4800 MT/s, and a compatible module is advertised at 5600 MT/s. What can you conclude about the module’s operating rate?

A
It must run at 5600 MT/s because that is its advertised rate.
B
It cannot be used because its rated data rate exceeds the system’s supported rate.
C
It may run below 5600 MT/s, but the exact rate is not guaranteed from this information alone.

Written response

1 point

After confirming that RAM modules are seated correctly and restoring standard settings, what testing method can help distinguish a faulty module from a slot or configuration issue?