Only one device on a network has slow or unstable connectivity, while other devices work normally. Which investigation is the best next step?
6 Network Performance Problems Online Quiz Questions
Use this free practice quiz with 20 questions to review 6 Network Performance Problems, test your knowledge, and prepare for your next test or exam.
To check whether performance changes with network activity, measure while the network is both and busy.
If Wi-Fi performance improves near the access point, that result alone proves that interference caused the problem.
- A
True
- B
False
What network-performance metric describes the time taken for data to travel between endpoints?
A device performs poorly over Wi-Fi but performs much better over Ethernet. Which direction should the investigation take first?
- A
Investigate Wi-Fi or radio-frequency conditions.
- B
Focus first on the shared remote service, because Ethernet and Wi-Fi use different services.
- C
Conclude that the device's application is necessarily at fault.
A few missing ping replies, by themselves, prove that the affected application is losing packets.
- A
True
- B
False
If repeated tests leave the cause inconclusive, what should you collect during a reproducible slowdown to investigate the traffic in more detail?
Which observations support investigating congestion as a cause of a slowdown? Select all that apply.
- A
Throughput falls and latency rises mainly during busy periods.
- B
The slowdown coincides with heavy downloads or backups.
- C
Many clients are connected, but there is no evidence of activity or high utilization.
- D
Interface or wireless-channel utilization is high during the slowdown.
Several users near one access point report unstable Wi-Fi. Which access-point or client report details would help investigate the wireless conditions? Select all that apply.
- A
Signal-to-noise ratio
- B
Retries
- C
Channel utilization
- D
Roaming or disconnect events
- E
The number of websites bookmarked on the device
Router tests are steady, but tests to a remote host are slow or lossy. Investigate the router , internet path, or remote destination.
A connection has high bandwidth, but an interactive application still feels slow. Which explanation is consistent with the performance signals?
- A
High latency or packet loss may still make the connection feel slow.
- B
High bandwidth guarantees low latency and no packet loss.
- C
The connection must have a weak Wi-Fi signal, even if it is wired.
One application is slow, but other network services work normally. Which direction is the most appropriate to investigate?
- A
Investigate the application server, its service path, or application-specific requirements.
- B
Conclude that the entire local network is congested.
- C
Replace the access point without checking whether other services are affected.
What term describes the capacity of a network connection, rather than the rate actually achieved?
A user reports slow or unstable performance on one device, but the cause is not known. Describe a diagnostic sequence that can distinguish a device or Wi-Fi problem from a shared network-path or application problem, and explain how to verify whether a change helped.
A device has poor performance over Wi-Fi but performs well over Ethernet on the same network. Which direction should you investigate first?
- A
The remote service is definitely overloaded.
- B
The problem likely involves Wi-Fi or radio-frequency conditions.
- C
The device must have a faulty network adapter.
- D
The internet service is definitely the cause.
What is the term for the time measured for data to travel to a destination and back?
A remote host does not reply consistently to ping, but the affected application has not yet been tested. What is the soundest conclusion?
- A
Ping tests every application protocol and proves whether the service is working.
- B
Ping can measure bandwidth but cannot show delay.
- C
Ping tests ICMP, so its results may not represent application performance.
- D
Ping tests only wireless connections.
An access point serves many clients, but it is unclear whether their activity is causing a slowdown. Which check would provide the most relevant evidence of congestion?
- A
A large client count by itself proves the wireless channel is congested.
- B
Check active traffic and wireless-channel utilization during the slowdown.
- C
Replace the access point immediately, without taking measurements.
- D
Assume the remote server is the cause whenever many clients are connected.
A few ping replies are missing. This alone proves that traffic for the affected application is being lost.
- A
True
- B
False
Tests to the local router are steady, but tests to a reliable remote host are slow or lossy. Where should you focus the next investigation?
- A
Investigate the router uplink, internet path, or remote destination.
- B
Start by replacing the affected device’s wireless adapter.
- C
Conclude that the local Wi-Fi link is the cause.
- D
Assume the application itself is the only possible cause.
Related study packs and tools
- Quiz
1 Foundations of Threat Analysis
A medium-difficulty quiz on threat-analysis concepts, evidence, lifecycle, and defensive decisions.
- Quiz
1 Networking Fundamentals
A medium-difficulty quiz on networking fundamentals, including communication roles, protocol layers, data units, and network models.
CompTIA A+ NetworkingUpdated - Quiz
2 Protocols and Ports
A medium-difficulty quiz on interpreting network protocols, ports, and common traffic patterns.
CompTIA A+ NetworkingUpdated - Quiz
3 Accessories and Peripheral Devices
A medium-difficulty quiz on selecting, connecting, configuring, and troubleshooting laptop accessories and peripheral devices.
CompTIA A+ Mobile DevicesUpdated - Study guide
3 Accessories and Peripheral Devices
Learn how to choose compatible laptop accessories, connect and configure them, and troubleshoot common problems safely.
CompTIA A+ Mobile DevicesUpdated - Quiz
4 Mobile Connectivity
A 14-question quiz on applying mobile connectivity concepts to common settings, usage, and troubleshooting situations.
CompTIA A+ Mobile DevicesUpdated - Quiz
4 Wi-Fi Networks
A 14-question quiz on Wi-Fi networks, moving from core concepts to applied troubleshooting and explanation.
CompTIA A+ NetworkingUpdated - Quiz
5 Network Operations and Reliability
A medium-difficulty quiz on network operations, monitoring, configuration management, resilience, and recovery planning.
- Quiz
6 Certificates and Public Key Infrastructure
A medium-difficulty quiz on certificates and public key infrastructure, focused on applying concepts to practical validation and issuance scenarios.
- Quiz
6 Diagnosing Network Problems
A medium-difficulty quiz on diagnosing network problems by testing systematically, interpreting evidence, and narrowing down likely causes.
- Quiz
6 SOHO Network Setup and Troubleshooting
A medium-difficulty quiz on setting up, securing, and troubleshooting a small-office/home-office network.
CompTIA A+ NetworkingUpdated - Study guide
7 Integrated Troubleshooting Practice
A practical workflow for isolating mixed hardware, display, storage, mobile-device, and network problems, protecting data, and verifying repairs.