Timedora

Measuring Investment Returns

How to calculate and interpret investment returns across holding periods, cash flows, fees, and taxes.

From Holding-Period to Annualized Returns

Start with the whole holding period

A measures the investment’s total gain or loss during the time it is held. For an investment with no additional contributions or withdrawals, include both the change in value and any income received:

HPR=V1−V0+IV0,\text{HPR} = \frac{V_1 - V_0 + I}{V_0},

where V0V_0 is the beginning value, V1V_1 is the ending value, and II is income such as dividends or interest. The gain or loss is divided by the amount invested, so the result is a percentage that can be compared across investments of different sizes.

Worked example: An asset bought for $1,000 ends at $1,080 and pays $20 in dividends. Its return is

1,080−1,000+201,000=1001,000=0.10=10%.\frac{1{,}080-1{,}000+20}{1{,}000} =\frac{100}{1{,}000}=0.10=10\%.

The asset’s price alone rose by 8%, but including the dividends makes the total HPR 10%. This describes the full holding period; unless that period is one year, the figure is not automatically an annual return.

Link successive returns by compounding

When gains remain invested, each period’s return applies to the value accumulated so far. For periodic returns r1,r2,…,rnr_1, r_2, \ldots, r_n, multiply the growth factors and subtract one:

Rcumulative=(1+r1)(1+r2)⋯(1+rn)−1.R_{\text{cumulative}}=(1+r_1)(1+r_2)\cdots(1+r_n)-1.

For example, a 10% gain followed by a 10% loss gives

(1+0.10)(1−0.10)−1=(1.10)(0.90)−1=0.99−1=−0.01.(1+0.10)(1-0.10)-1=(1.10)(0.90)-1=0.99-1=-0.01.

The cumulative result is a 1% loss, not zero. The loss applies to the increased value after the gain, so equal-sized gains and losses do not cancel when measured as percentages.

Convert a cumulative result to an annual equivalent

Annualization expresses a over TT years as the constant annual compound rate that would lead to the same result:

Rannualized=(1+Rcumulative)1/T−1.R_{\text{annualized}}=(1+R_{\text{cumulative}})^{1/T}-1.

For a 21% over two years, the calculation is

(1+0.21)1/2−1=(1.21)1/2−1=0.10=10%.(1+0.21)^{1/2}-1=(1.21)^{1/2}-1=0.10=10\%.

Thus 10% per year, compounded for two years, is equivalent to the stated 21% . Annualization helps compare results covering different lengths of time. It does not say that the investment actually earned 10% in each year, nor does it predict future performance. Simply multiplying a short-period return by the number of periods in a year is not equivalent, because that ignores compounding.

Returns When Money Moves In and Out

Why account values alone can mislead

A deposit increases an account’s value, but it is not investment profit; a withdrawal reduces the value, but it is not necessarily an investment loss. So when money moves in or out, comparing only beginning and ending account values can misstate investment performance. Return measures differ in how they handle these external cash flows, and each answers a different question.

Two measures for two questions

focuses on how the investment performed, apart from the timing and size of the investor’s deposits or withdrawals. Calculate the return for each subperiod between cash flows, then compound the subperiod returns. This is useful when evaluating a manager or strategy independently of when an investor added or removed money.

reflects the investor’s experience, including the amount and timing of contributions and withdrawals. It is the internal rate of return (IRR) that equates the dated cash flows with the ending value. Because the amount invested at different times matters, MWR can differ from TWR.

Worked interpretation: Suppose an account earns 10% before a $1,000 deposit and earns 0% afterward. For TWR, calculate and link the subperiod returns; the deposit itself is not counted as a gain. MWR gives greater weight to the later period because more of the investor’s money was then in the account. The measures may therefore differ without either being calculated incorrectly: TWR addresses investment performance independent of cash-flow timing, while MWR reflects the return experienced given that timing.

Reporting Fees and Taxes Clearly

Say which costs are included

Fees and expenses reduce the value left invested and therefore reduce investor return. They may include transaction charges or ongoing costs such as advisory fees and fund operating expenses. Label a reported return gross of fees or net of fees so readers know whether those costs have been included.

Worked example: If $1,000 grows to $1,100 before a $10 fee charged at the end of the period, the is

1,100−1,0001,000=10%.\frac{1{,}100-1{,}000}{1{,}000}=10\%.

After the fee, the ending value is $1,090, so the is

1,090−1,0001,000=9%.\frac{1{,}090-1{,}000}{1{,}000}=9\%.

If the reported ending account value already reflects a fee, do not subtract that fee again. Also state whether taxes are included: pre-tax and after-tax returns are not directly interchangeable.

  • : The constant annual compound rate that would produce a specified over a given number of years.