What does the bioconcentration factor (BCF) compare?
BCF is the ratio of a chemical’s concentration in an organism to its concentration in surrounding water under specified conditions, commonly at or near steady state.
Study Environmental Chemical Partitioning and Sorption with 12 free online flashcards. Review key terms, definitions, and concepts with this interactive flashcard deck.
What does the bioconcentration factor (BCF) compare?
BCF is the ratio of a chemical’s concentration in an organism to its concentration in surrounding water under specified conditions, commonly at or near steady state.
What does a larger Hpc indicate under Hpc=Cwp?
With the convention Hpc=Cwp, a larger value indicates greater preference for air. It indicates equilibrium tendency, not how quickly volatilization occurs.
How can phase exchange and transport move chemicals between media?
Exchange can occur in both directions, such as adsorption from water onto particles and desorption back into water. Flow, diffusion, settling, and mixing can transport chemicals between media.
How do adsorption and absorption differ?
Adsorption is accumulation at a surface; absorption is uptake into a material’s interior.
What does Kd=CwCs describe?
Kd=CwCs, where Cs is the concentration associated with solids and Cw is the dissolved concentration in water. A higher Kd generally indicates stronger solid-phase association under the measured conditions.
What factors influence environmental partitioning?
Partitioning describes how a chemical is distributed between phases. It is influenced by properties such as volatility and water solubility, and by conditions such as temperature, pH, salinity, and organic-carbon content.
Why can partitioning data alone not predict concentration or persistence?
Partitioning data help identify likely destinations and exposure routes, but do not by themselves predict total environmental concentrations or persistence. Transport and transformation also matter.
How can sediment act as both a sink and a later source?
Soil or sediment can store chemicals as a sink and later release some back into pore water or overlying water as conditions change.
How are Kd, Koc, and foc approximately related?
For many nonionic organic chemicals, Kd≈Kocfoc, where foc is the fraction of organic carbon. This is an approximation; mineral surfaces and site conditions can also affect sorption.
What should you check before comparing Henry’s law constants?
Check units and definitions before comparing Henry’s law constants: they may be reported using conventions other than Hpc=Cwp.
What does a partitioning coefficient not tell you about equilibrium?
A partitioning coefficient describes distribution between phases under specified conditions; it does not by itself show how quickly equilibrium is reached.
When is “sorption” the useful term?
Use sorption as a broader term when the mechanism is uncertain or both adsorption and absorption may occur.
Learn how charge, current, voltage, resistance, power, and energy are related in electric circuits, including how to apply Ohm’s law and interpret worked calculations.
Review how processing, structure, properties, and performance connect, and how engineering materials are classified and selected.
A medium-difficulty quiz on representing vectors, calculating their components and magnitudes, and applying vector operations in engineering mechanics.
A medium-difficulty quiz on atomic bonding, crystal structures, unit cells, and crystallographic notation. Questions progress from interpreting individual properties to applying and comparing structural concepts.
Learn how atomic bonding relates to crystal order, how unit cells and Miller indices describe crystals, and how common metal and ceramic structures differ.
A medium-difficulty quiz on how materials respond to stress, deformation, repeated loading, sustained loading, and flaws.
Review how metal structure, alloy composition, processing, heat treatment, and application requirements shape the properties and uses of engineering metals.
Learn how metal structure, composition, processing, and heat treatment shape material properties, and how to select an alloy for an engineering application.
Learn how engineers apply professional duties, ethical codes, safety practices, and community considerations to responsible engineering decisions.
Learn how polymer chain structure, molecular-weight distribution, thermal behavior, and processing methods determine the properties and uses of polymer materials.
Learn how composite materials combine constituents, how reinforcement arrangements shape their properties, and how to select them for particular applications.
A medium-difficulty quiz on applying materials-selection principles, evaluating candidates, and accounting for processing and service requirements.