Under oxygen-poor conditions, microorganisms or reactive minerals can transfer electrons to some contaminants. Which redox process does this electron gain represent?
Environmental Chemical Transformation and Degradation Online Quiz Questions
Use this free practice quiz with 20 questions to review Environmental Chemical Transformation and Degradation, test your knowledge, and prepare for your next test or exam.
Select all statements that correctly describe hydrolysis and factors that influence its rate.
- A
It is a reaction with water that breaks one or more chemical bonds.
- B
Its rate may depend strongly on pH.
- C
It occurs only through the activity of living microorganisms.
- D
Its rate can vary with temperature and molecular structure.
True or false: If a chemical disappears from water because it sorbs to sediment, that disappearance alone shows that the chemical was degraded and its hazard eliminated.
- A
True
- B
False
A laboratory measured a chemical's hydrolysis rate at one pH, but the chemical is being assessed in water with a different pH. Which environmental factor should be considered when judging whether the measured rate applies?
In , the chemical absorbs sunlight and becomes reactive. In , sunlight creates reactive substances in the environment, which then react with the chemical.
Explain how microbial and environmental conditions, as well as a chemical's accessibility to organisms, can affect biodegradation. Then distinguish partial biodegradation from mineralization.
A chemical has a 10-day half-life and follows first-order kinetics. Assuming no other processes or sources affect it, about what fraction of its initial concentration remains after 20 days?
- A
About one-half of the initial concentration.
- B
About one-quarter of the initial concentration.
- C
About one-eighth of the initial concentration.
- D
None of the initial concentration.
Select all statements that correctly describe first-order rate constants and the assumptions involved in estimating an overall loss rate.
- A
For several independent first-order processes acting at once, their rate constants can be added to estimate the overall loss rate.
- B
The summed-rate approximation assumes the processes operate under the stated conditions and measured loss is due to transformation rather than transport, dilution, or sorption.
- C
Rate constants should be added even when the processes are not independent or the loss is due to transport.
- D
A larger first-order rate constant corresponds to a shorter half-life.
True or false: At a fixed pH, hydrolysis is often treated as pseudo-first-order because water is usually in large excess, making the observed rate proportional to the concentration of the chemical being transformed.
- A
True
- B
False
A chemical disappears from water because it attaches to sediment, without being chemically degraded. What physical process explains its disappearance from the water?
In redox reactions, oxidation is the of electrons, while reduction is the of electrons.
A compound biodegrades rapidly in oxygenated surface water but slowly in an anoxic aquifer. Which explanation best fits this difference?
- A
The compound must be resistant to biodegradation in every environment.
- B
The needed microorganisms or electron acceptors may be scarce in the anoxic aquifer.
- C
Anoxic conditions always prevent chemical transformation.
- D
Oxygen is required for every form of biodegradation.
A transformation rate measured under one set of environmental conditions is a universal property of that chemical and can be applied unchanged in any setting.
- A
True
- B
False
What is the process called when sunlight creates reactive substances in the environment that then react with a chemical?
A chemical has a 10-day half-life. Assuming first-order kinetics and no other processes or sources, what fraction of its initial concentration remains after 20 days?
- A
One half of the initial concentration
- B
One eighth of the initial concentration
- C
One quarter of the initial concentration
- D
None of the initial concentration
Photolysis is usually negligible in deep groundwater that sunlight does not reach.
- A
True
- B
False
When assessing whether a laboratory transformation rate applies to a field setting, which measure of acidity should be considered?
Which redox process may be favored under oxygen-poor conditions, and what happens to electrons in that process?
- A
Oxidation, which is the gain of electrons
- B
Reduction, which is the gain of electrons
- C
Oxidation, which is the loss of electrons
- D
Neither oxidation nor reduction can occur
What is the name of a reaction with water that breaks one or more bonds in a chemical?
A chemical disappears from water after sorbing to sediment. What is the most accurate interpretation?
- A
The chemical must have been transformed into a less harmful product.
- B
The chemical was completely converted to inorganic products.
- C
The chemical may have sorbed to sediment, which is physical removal rather than chemical degradation.
- D
The chemical’s hazard has necessarily been eliminated.
Related study packs and tools
- Study guide
1 Electrical Quantities and Ohm’s Law
Learn how charge, current, voltage, resistance, power, and energy are related in electric circuits, including how to apply Ohm’s law and interpret worked calculations.
- Flashcards
01 Foundations of Materials Science
Review how processing, structure, properties, and performance connect, and how engineering materials are classified and selected.
- Quiz
1 Vectors for Engineering Mechanics
A medium-difficulty quiz on representing vectors, calculating their components and magnitudes, and applying vector operations in engineering mechanics.
- Quiz
02 Atomic Bonding and Crystal Structures
A medium-difficulty quiz on atomic bonding, crystal structures, unit cells, and crystallographic notation. Questions progress from interpreting individual properties to applying and comparing structural concepts.
- Study guide
02 Atomic Bonding and Crystal Structures
Learn how atomic bonding relates to crystal order, how unit cells and Miller indices describe crystals, and how common metal and ceramic structures differ.
- Quiz
04 Mechanical Properties of Materials
A medium-difficulty quiz on how materials respond to stress, deformation, repeated loading, sustained loading, and flaws.
- Flashcards
06 Metals and Alloys
Review how metal structure, alloy composition, processing, heat treatment, and application requirements shape the properties and uses of engineering metals.
- Study guide
06 Metals and Alloys
Learn how metal structure, composition, processing, and heat treatment shape material properties, and how to select an alloy for an engineering application.
- Study guide
7 Engineering Ethics and Responsibility
Learn how engineers apply professional duties, ethical codes, safety practices, and community considerations to responsible engineering decisions.
- Study guide
08 Polymers
Learn how polymer chain structure, molecular-weight distribution, thermal behavior, and processing methods determine the properties and uses of polymer materials.
- Study guide
09 Composite Materials
Learn how composite materials combine constituents, how reinforcement arrangements shape their properties, and how to select them for particular applications.
- Quiz
10 Materials Selection and Design
A medium-difficulty quiz on applying materials-selection principles, evaluating candidates, and accounting for processing and service requirements.