Timedora
Free Online Flashcard Deck

Environmental Measurement and Sampling Free Online Flashcards

Study Environmental Measurement and Sampling with 12 free online flashcards. Review key terms, definitions, and concepts with this interactive flashcard deck.

12 cards
01
Front

What does a “not detected” result establish?

Back

It means the measured concentration fell below the stated limit; the chemical may still be present at a lower concentration.

02
Front

How do grab and composite samples differ?

Back

A grab sample represents a particular place and time; a composite combines material across locations or times to estimate an average over that defined set.

03
Front

Convert 0.004 mg/L0.004\,\text{mg/L} to µg/L\text{µg/L}.

Back

0.004 mg/L=4 µg/L0.004\,\text{mg/L}=4\,\text{µg/L}. The concentration is unchanged; only the unit differs.

04
Front

What can duplicates or replicates reveal in quality control?

Back

Duplicates or replicates help evaluate variability and precision.

05
Front

What does “dissolved” commonly mean in a water measurement?

Back

It is commonly defined operationally by filtering the sample, and does not necessarily mean every measured molecule was freely dissolved.

06
Front

Does a small soil core necessarily represent an entire site?

Back

Not necessarily. A small core represents only its sampled location, depth, area, or mass and may not capture variation across the site.

07
Front

Why can’t gas-phase ppmv\text{ppmv} be converted directly to mg/m3\text{mg/m}^3 using a water equivalence?

Back

Gas-phase ppmv\text{ppmv} is a volume (equivalently, mole) ratio. Its conversion to mg/m3\text{mg/m}^3 depends on molecular weight, temperature, and pressure.

08
Front

How can sample handling change measured concentration?

Back

Volatile compounds may escape from poorly sealed samples; reactions, biological activity, light, or temperature changes can also alter analytes.

09
Front

How should a detected result below the quantitation limit be interpreted?

Back

It may be estimated and should be interpreted using its qualifier; it is not necessarily as precise as a result well above the limit.

10
Front

What can blanks reveal in environmental quality control?

Back

Blanks can reveal contamination introduced during collection or analysis.

11
Front

What do spikes help assess in a sample matrix?

Back

Spikes help assess analytical recovery in a particular sample matrix.

12
Front

What important pattern can a composite sample obscure?

Back

It may obscure short-lived peaks or local hot spots, even while estimating an average over the defined locations or times.