How should you verify a backup before an OS installation?
Keep the backup on a separate drive or trusted backup service, then verify that its files can be opened. A backup stored only on the disk being installed is not safe.
Study Operating System Installation Essentials with 12 free online flashcards. Review key terms, definitions, and concepts with this interactive flashcard deck.
How should you verify a backup before an OS installation?
Keep the backup on a separate drive or trusted backup service, then verify that its files can be opened. A backup stored only on the disk being installed is not safe.
What must you confirm before proceeding with disk selection?
Review the destination disk and installer summary carefully. Proceed only when you are certain that the selected drive and the intended effect on its data are correct.
Which hardware and system requirements should you check before installation?
Check the OS-specific processor, memory, storage, graphics, firmware, and security requirements. Requirements vary by operating system and release.
Which installation method can deploy an OS over a network to many devices?
Use network installation, often with PXE, when deploying to many devices without individual USB drives. It requires compatible firmware, network access, and deployment infrastructure.
What basic administration follows OS installation?
Install updates and required drivers, activate or enroll the device as appropriate, enable security protections, restore files, and test essential applications and devices. Confirm a recovery method.
How do you make a USB drive bootable from an OS ISO?
Use a vendor tool or trusted image-writing utility to write the ISO to the USB drive. Simply copying the ISO file onto an ordinary USB drive is generally insufficient.
What distinguishes a virtual-machine OS installation?
A virtual-machine installation runs the OS inside virtualization software, useful for testing, training, or isolation without repartitioning a physical computer.
Which partition styles are commonly associated with UEFI and legacy BIOS?
UEFI systems commonly use GPT, while older legacy BIOS installations may use MBR. Changing partition styles or firmware modes can affect existing boot systems.
What should you do if installation media does not appear in the boot menu?
Select the installation media from the one-time boot menu. If it does not appear, consult the device documentation before changing firmware or security settings.
What storage preparation is important for a dual-boot installation?
For dual boot, establish sufficient unallocated space and keep a verified backup of the existing OS. Check how encryption may affect the intended setup.
How do you check that an installation starts from internal storage?
Remove the installation media when prompted so the computer boots from internal storage, then sign in and confirm that the desktop or command-line environment starts normally.
What data-protection check is needed before writing an OS image to USB?
The writing process normally erases the selected USB drive. Check its contents and confirm that you selected the correct device before writing.
A medium-difficulty quiz on EPA pressure categories, refrigeration-cycle components, pressure behavior, and safety hazards.
A medium-difficulty quiz on low-pressure chiller operation and service practices, from practical precautions to applied reasoning.
A practical guide to preparing safely for low-pressure refrigeration service by assessing hazards, identifying refrigerant, checking equipment, and planning recovery and evacuation.
A medium-difficulty quiz on EPA Section 608 Type I certification scope, small-appliance criteria, and refrigerant handling requirements.
A quiz on safe setup, operation, and completion of refrigerant recovery for low-pressure appliances.
Learn how to prepare for refrigerant recovery, select and monitor a recovery method, meet applicable evacuation endpoints, and handle recovered refrigerant safely.
Learn how to prepare, connect, and operate recovery equipment for low-pressure appliances while protecting refrigerant quality and handling cylinders safely.
A quiz on safe evacuation, dehydration, and vacuum verification for refrigeration circuits.
A 14-question quiz on safe, compliant recovery procedures for small appliances, including equipment selection, recovery targets, and refrigerant handling.
Practice chiller recovery, safety checks, endpoint verification, and service documentation. Follow equipment-specific procedures and applicable requirements.
A practical framework for safely recovering refrigerant from chillers, verifying recovery and dehydration endpoints, troubleshooting problems, and documenting service work.
Learn how to diagnose, service, document, and prepare small appliances for disposal while meeting applicable refrigerant recovery and certification requirements.