Timedora
Free Online Flashcard Deck

Wastewater Characteristics and Monitoring Free Online Flashcards

Study Wastewater Characteristics and Monitoring with 12 free online flashcards. Review key terms, definitions, and concepts with this interactive flashcard deck.

12 cards
01
Front

What does total suspended solids (TSS) measure?

Back

TSS measures particles retained by a specified filtration method.

02
Front

How do BOD and COD differ?

Back

BOD estimates oxygen used by microorganisms to break down biodegradable organic matter; COD estimates oxygen-equivalent demand from chemically oxidizable material.

03
Front

At 1.0 MGD and 200 mg/L BOD₅, what is the approximate load?

Back

About 1,668 lb/day. Using the load conversion: 200 mg/L×1.0 MGD×8.34≈1,668 lb/day200\ \text{mg/L} \times 1.0\ \text{MGD} \times 8.34 \approx 1{,}668\ \text{lb/day}.

04
Front

What is wastewater?

Back

Wastewater is water altered by human activities and carried for treatment or discharge.

05
Front

Why are wastewater pathogens a concern, and how may they be monitored?

Back

Pathogens are disease-causing microorganisms and pose a public-health concern even when invisible. Monitoring may use fecal-contamination indicators instead of testing directly for every pathogen.

06
Front

Why might industrial wastewater need pretreatment?

Back

Industrial wastewater varies widely and may contain concentrated organic matter, salts, metals, chemicals, or treatment-inhibiting substances. Some industrial discharges need pretreatment before entering a municipal sewer.

07
Front

What forms can wastewater nitrogen take, and why can excess nutrients matter?

Back

Nitrogen may occur as organic nitrogen, ammonia, nitrite, or nitrate; phosphorus may be dissolved or particulate. Excess nutrients entering receiving waters can promote eutrophication.

08
Front

In a sanitary sewer, how do infiltration and inflow differ?

Back

Infiltration is groundwater entering through pipe or joint defects; inflow is stormwater entering through connections such as roof drains or manholes.

09
Front

How does a composite sample differ from a grab sample?

Back

A grab sample is collected at one time; a composite sample combines portions collected over a period, sometimes in proportion to flow.

10
Front

What do pH and alkalinity indicate for wastewater treatment?

Back

pH indicates acidity or alkalinity; values far from neutral can disrupt biological treatment. Alkalinity helps indicate wastewater’s capacity to resist pH changes.

11
Front

What distinguishes a composite sample collected over time?

Back

A composite combines portions gathered over a period, which may be useful when the monitoring purpose requires a sample representing that period. The appropriate approach depends on the parameter and purpose.

12
Front

What are possible consequences of high solids in wastewater?

Back

High solids can contribute to deposits, turbidity, and sludge production.