Which statement best describes the two linked outputs of wastewater treatment?
Wastewater Treatment Outputs and Sludge Online Quiz Questions
Use this free practice quiz with 20 questions to review Wastewater Treatment Outputs and Sludge, test your knowledge, and prepare for your next test or exam.
Select all statements that correctly describe sources or types of sludge.
- A
Primary sludge settles in primary clarifiers.
- B
Secondary sludge is separated after biological treatment and consists largely of microorganisms and other solids.
- C
Chemical sludge can form when chemicals are added to remove pollutants such as phosphorus.
- D
Primary sludge consists largely of microorganisms separated after biological treatment.
Wastewater treatment can transfer some pollutants from the water into sludge rather than make them disappear.
- A
True
- B
False
In an activated-sludge system, what does WAS stand for? Enter the full term.
In an activated-sludge system, settled solids returned to the aeration basin are called , while excess solids removed from the process are called .
Explain how wastewater treatment produces effluent and sludge. Describe how primary, secondary, and chemical sludge arise, and distinguish RAS from WAS in an activated-sludge system.
Which statement correctly distinguishes RAS from WAS in an activated-sludge system?
- A
RAS is excess solids removed from the process; WAS is solids returned to the aeration basin.
- B
RAS is settled solids returned to the aeration basin; WAS is excess solids removed from the process.
- C
RAS is primary sludge; WAS is chemical sludge.
- D
RAS is treated liquid; WAS is concentrated residual solids.
Select all statements that correctly describe how sludge types are produced.
- A
Primary sludge settles in primary clarifiers.
- B
Secondary sludge is separated after biological treatment.
- C
Chemical sludge can form when chemicals are added to remove pollutants such as phosphorus.
- D
Secondary sludge is the treated liquid discharged as effluent.
In an activated-sludge plant, RAS leaves the process as excess solids, while WAS returns to the aeration basin.
- A
True
- B
False
What is the sludge that settles out in primary clarifiers called? Enter the sludge type as a two-word term.
Wastewater treatment produces treated liquid called and concentrated residual solids commonly called .
In an activated-sludge system, what does return activated sludge (RAS) refer to?
- A
Excess solids removed from the process for treatment with other sludge.
- B
Settled solids returned to the aeration basin.
- C
Solids that settle out in primary clarifiers.
- D
Solids formed when chemicals are added to remove pollutants.
True or false: When wastewater treatment removes pollutants from the water, those pollutants always disappear rather than being transferred into solids.
- A
True
- B
False
In an activated-sludge system, what three-letter abbreviation names the excess solids removed from the process?
Which statement describes primary sludge?
- A
It settles out in primary clarifiers.
- B
It consists largely of microorganisms and other solids separated after biological treatment.
- C
It is formed when chemicals are added to remove pollutants such as phosphorus.
- D
It is the portion of settled solids returned to the aeration basin.
What is the term for the treated liquid output of wastewater treatment?
Which statement best describes the outputs of wastewater treatment and what can happen to pollutants removed from the water?
- A
Treatment destroys all pollutants removed from the water.
- B
Treatment produces treated liquid and concentrated residual solids, and some pollutants can be transferred into the solids.
- C
Treatment produces sludge only when chemicals are added.
- D
Treatment produces only liquid effluent; solids are not a treatment output.
Which description identifies primary sludge and its source in a wastewater treatment plant?
- A
It is made mostly of microorganisms separated after biological treatment.
- B
It forms when chemicals are added to remove pollutants such as phosphorus.
- C
It settles out in primary clarifiers and contains readily settleable solids.
- D
It consists of settled solids returned to the aeration basin.
In an activated-sludge system, how do return activated sludge (RAS) and waste activated sludge (WAS) differ?
- A
RAS returns some settled solids to the aeration basin; WAS removes excess solids from the process.
- B
RAS removes excess solids from the process; WAS returns settled solids to the aeration basin.
- C
RAS is chemical sludge; WAS is primary sludge.
- D
RAS and WAS both refer to treated liquid leaving the plant.
What is the main source and composition of secondary sludge?
- A
It contains readily settleable organic and inorganic solids from primary clarifiers.
- B
It forms when chemicals are added to remove pollutants such as phosphorus.
- C
It is the treated liquid discharged from the plant.
- D
It consists largely of microorganisms and other solids separated after biological treatment.
Related study packs and tools
- Study guide
1 Electrical Quantities and Ohm’s Law
Learn how charge, current, voltage, resistance, power, and energy are related in electric circuits, including how to apply Ohm’s law and interpret worked calculations.
- Flashcards
01 Foundations of Materials Science
Review how processing, structure, properties, and performance connect, and how engineering materials are classified and selected.
- Quiz
1 Vectors for Engineering Mechanics
A medium-difficulty quiz on representing vectors, calculating their components and magnitudes, and applying vector operations in engineering mechanics.
- Quiz
02 Atomic Bonding and Crystal Structures
A medium-difficulty quiz on atomic bonding, crystal structures, unit cells, and crystallographic notation. Questions progress from interpreting individual properties to applying and comparing structural concepts.
- Quiz
04 Mechanical Properties of Materials
A medium-difficulty quiz on how materials respond to stress, deformation, repeated loading, sustained loading, and flaws.
- Flashcards
05 Phase Diagrams and Phase Transformations
Learn how phase diagrams describe equilibrium, how solidification and transformations form microstructures, and how heat treatment and cooling control material structure.
- Flashcards
06 Metals and Alloys
Review how metal structure, alloy composition, processing, heat treatment, and application requirements shape the properties and uses of engineering metals.
- Study guide
06 Metals and Alloys
Learn how metal structure, composition, processing, and heat treatment shape material properties, and how to select an alloy for an engineering application.
- Study guide
7 Engineering Ethics and Responsibility
Learn how engineers apply professional duties, ethical codes, safety practices, and community considerations to responsible engineering decisions.
- Study guide
08 Polymers
Learn how polymer chain structure, molecular-weight distribution, thermal behavior, and processing methods determine the properties and uses of polymer materials.
- Study guide
09 Composite Materials
Learn how composite materials combine constituents, how reinforcement arrangements shape their properties, and how to select them for particular applications.
- Quiz
10 Materials Selection and Design
A medium-difficulty quiz on applying materials-selection principles, evaluating candidates, and accounting for processing and service requirements.