Timedora
Free Online Flashcard Deck

Water-Quality Indicators and Test Interpretation Free Online Flashcards

Study Water-Quality Indicators and Test Interpretation with 12 free online flashcards. Review key terms, definitions, and concepts with this interactive flashcard deck.

12 cards
01
Front

What is a water-quality indicator?

Back

An indicator is a measurable property or organism that provides information about water quality or treatment performance.

02
Front

Why can’t one test prove drinking water is safe?

Back

No single test proves water is safe. Interpret results together with information about the source, treatment, distribution system, and applicable standards.

03
Front

What does high turbidity indicate—and what does it not measure?

Back

Turbidity warns of particles that may interfere with disinfection, but it does not directly measure pathogen concentration.

04
Front

Does clear-looking water establish that it is safe?

Back

No. Clear appearance does not establish safety; water can still contain disease-causing microbes or dissolved chemicals.

05
Front

What system context helps interpret water-quality results?

Back

Consider the water source, treatment, distribution system, and applicable standards; these put measurements into context.

06
Front

Treated-water turbidity rises as disinfectant residual falls. What should this prompt?

Back

Together, these changes signal a need to investigate treatment performance; they are not, by themselves, proof of a particular contaminant.

07
Front

What does detecting E. coli in drinking water indicate?

Back

It indicates fecal contamination and calls for prompt follow-up under relevant public-health procedures.

08
Front

Does a disinfectant residual prove that all pathogens are absent?

Back

No. A disinfectant residual indicates that disinfectant remains at the measurement point; it does not prove all pathogens are absent.

09
Front

How does the fecal-contamination specificity of total coliforms compare with E. coli?

Back

Total coliforms can indicate possible contamination or help assess system integrity, but they are less specific for fecal pollution than E. coli.

10
Front

What does a negative indicator test establish about all pathogens?

Back

No. A negative indicator test reduces concern about the contamination it represents, but does not guarantee every pathogen is absent.

11
Front

Can conductivity identify specific dissolved chemicals?

Back

No. Conductivity is a rapid screening measure for dissolved ions; it cannot identify which substances are present or replace targeted chemical tests.

12
Front

What can normal taste and appearance tell you about water safety?

Back

No. A normal appearance or taste does not establish safety; changes can prompt investigation, but their absence does not rule out hazards.