Which advanced-treatment process uses a resin to exchange dissolved anions in water and can target nitrate?
Drinking-Water Treatment and Disinfection Online Quiz Questions
Use this free practice quiz with 20 questions to review Drinking-Water Treatment and Disinfection, test your knowledge, and prepare for your next test or exam.
Select all statements that accurately describe a drinking-water disinfectant and a relevant residual or by-product consideration.
- A
Monochloramine acts more slowly than chlorine but generally persists longer in distribution systems; its use calls for managing nitrification.
- B
UV light can inactivate pathogens without adding a chemical disinfectant, but it leaves no residual and its performance depends on delivered dose and water clarity.
- C
Ozone is a primary disinfectant that provides no lasting distribution-system residual; where bromide is present, it can form bromate.
- D
Chlorine alone is effective against Cryptosporidium and does not form disinfection by-products.
True or false: To manage disinfection by-products, a utility should use the largest possible disinfectant dose, even when that exceeds what is needed for effective pathogen control.
- A
True
- B
False
Which ion-exchange process can target nitrate, a negatively charged contaminant? Enter the process name.
Primary disinfection inactivates during treatment. Secondary disinfection maintains a protective disinfectant as water travels through pipes and storage.
Describe practical ways a drinking-water utility can manage disinfection by-products while maintaining effective pathogen control. Include measures taken before disinfection, how disinfectant use can be optimized, and at least one distribution-system or residual-management measure.
Which advanced-treatment process uses pressure to push water through a semipermeable membrane that retains selected dissolved substances?
- A
Aeration
- B
Granular activated carbon (GAC)
- C
Reverse osmosis and nanofiltration
- D
Ion exchange
Select all practices that help manage disinfection by-products while maintaining effective pathogen control.
- A
Reduce natural organic matter before disinfection using a suitable process such as optimized coagulation and filtration or GAC.
- B
Use an effective disinfectant dose and contact time without unnecessary excess, selecting the method and sequence for source-water conditions.
- C
Monitor disinfectant residuals and DBPs in the distribution system and manage water age.
- D
Treat or safely dispose of concentrated residuals such as ion-exchange brine and membrane concentrate.
- E
Skip monitoring of residuals and DBPs once a treatment technology has been selected.
True or false: Ozone provides a lasting disinfectant residual as water travels through the distribution system.
- A
True
- B
False
What waste stream do both reverse osmosis and nanofiltration produce? Enter the name of the waste stream.
Primary disinfection inactivates pathogens during treatment; maintains a protective disinfectant residual as water travels through pipes and storage.
Which action can reduce the amount of natural organic matter available to react with disinfectants, while still allowing effective pathogen control?
- A
Use granular activated carbon before disinfection to reduce natural organic matter that could react with disinfectants.
- B
Increase disinfectant dose beyond what is needed for effective pathogen control.
- C
Stop monitoring disinfectant residuals and disinfection by-products in the distribution system.
- D
Leave concentrated treatment residuals and membrane concentrates without appropriate handling.
Longer water age in a distribution system can allow disinfection by-products to increase while disinfectant residuals decline.
- A
True
- B
False
Which two substances are used to form monochloramine?
A water system is evaluating treatment options for nitrate. Which process uses a resin that can target nitrate as a negatively charged contaminant?
- A
Aeration, which transfers volatile compounds from water into air.
- B
Anion exchange, which exchanges dissolved anions for ions held on a resin.
- C
Granular activated carbon, which adsorbs compounds onto a porous carbon surface.
- D
Adsorptive media, such as iron-based media or activated alumina, which can target selected contaminants such as arsenic or fluoride.
Where bromide is present, what by-product can form during ozonation?
Which distribution-system practice is recommended to manage disinfection by-products while maintaining effective pathogen control?
- A
Stop monitoring disinfection by-products once water enters the distribution system.
- B
Use an unnecessarily high disinfectant dose to prevent any by-product formation.
- C
Monitor disinfectant residuals and disinfection by-products, maintain storage facilities, and manage water age.
- D
Replace distribution-system monitoring with ordinary settling to remove dissolved contaminants.
Which advanced-treatment process can target nitrate with anion-exchange resin and produces concentrated waste brine during regeneration?
- A
Aeration, which transfers volatile compounds into air.
- B
Granular activated carbon, whose exhausted media must be replaced or regenerated.
- C
Ultraviolet advanced oxidation, which transforms some target chemicals using reactive species.
- D
Ion exchange, whose regeneration creates a concentrated waste brine.
A utility is evaluating a treatment process for dissolved nitrate. Which option correctly describes an applicable process and a residual it produces?
- A
Anion exchange; it can target nitrate, and regeneration creates concentrated waste brine.
- B
Aeration; it transfers nitrate from water into air as a volatile compound.
- C
Granular activated carbon; it captures nitrate by adsorbing it onto porous carbon.
- D
Reverse osmosis; it exchanges nitrate for ions held on a resin and produces waste brine through regeneration.
A utility wants to reduce disinfection by-product formation while continuing effective pathogen control. Which action is a recommended way to reduce DBP precursors?
- A
Increase disinfectant dose beyond what is needed and leave precursors in the water.
- B
Stop monitoring distribution-system residuals and DBPs.
- C
Replace precursor removal with a rule that alternative disinfectants cannot form by-products.
- D
Remove natural organic matter before disinfection using a suitable process such as optimized coagulation and filtration or GAC.
Related study packs and tools
- Study guide
1 Electrical Quantities and Ohm’s Law
Learn how charge, current, voltage, resistance, power, and energy are related in electric circuits, including how to apply Ohm’s law and interpret worked calculations.
- Flashcards
01 Foundations of Materials Science
Review how processing, structure, properties, and performance connect, and how engineering materials are classified and selected.
- Quiz
1 Vectors for Engineering Mechanics
A medium-difficulty quiz on representing vectors, calculating their components and magnitudes, and applying vector operations in engineering mechanics.
- Quiz
02 Atomic Bonding and Crystal Structures
A medium-difficulty quiz on atomic bonding, crystal structures, unit cells, and crystallographic notation. Questions progress from interpreting individual properties to applying and comparing structural concepts.
- Quiz
04 Mechanical Properties of Materials
A medium-difficulty quiz on how materials respond to stress, deformation, repeated loading, sustained loading, and flaws.
- Flashcards
05 Phase Diagrams and Phase Transformations
Learn how phase diagrams describe equilibrium, how solidification and transformations form microstructures, and how heat treatment and cooling control material structure.
- Flashcards
06 Metals and Alloys
Review how metal structure, alloy composition, processing, heat treatment, and application requirements shape the properties and uses of engineering metals.
- Study guide
06 Metals and Alloys
Learn how metal structure, composition, processing, and heat treatment shape material properties, and how to select an alloy for an engineering application.
- Study guide
7 Engineering Ethics and Responsibility
Learn how engineers apply professional duties, ethical codes, safety practices, and community considerations to responsible engineering decisions.
- Study guide
08 Polymers
Learn how polymer chain structure, molecular-weight distribution, thermal behavior, and processing methods determine the properties and uses of polymer materials.
- Study guide
09 Composite Materials
Learn how composite materials combine constituents, how reinforcement arrangements shape their properties, and how to select them for particular applications.
- Quiz
10 Materials Selection and Design
A medium-difficulty quiz on applying materials-selection principles, evaluating candidates, and accounting for processing and service requirements.