2 Evacuation Levels and Verification Online Quiz Questions

What does the vacuum reading on a compound manifold gauge indicate?

For a high-pressure stationary appliance with a full charge below 200 lb, what endpoint does the table specify, regardless of whether recovery equipment was made before or on or after Nov. 15, 1993?

For a low-pressure appliance, the evacuation endpoint is 25 mm Hg measured on what pressure basis?

For a motor-vehicle A/C recovery cylinder without a float valve, what percentage of gross weighted capacity is the specific limit noted in the material?

A medium-pressure stationary appliance has a full charge of 200 lb or more. Recovery equipment was made on or after Nov. 15, 1993. What evacuation endpoint applies?

Which checks are appropriate when verifying a recovery cylinder for safe use? Select all that apply.

Which group is excluded from the stationary-appliance evacuation table described here?

Which practices support correct verification of an appliance's evacuation endpoint? Select all that apply.

A very-high-pressure stationary appliance is being recovered. According to the table, what endpoint applies whether the recovery equipment was made before or on or after Nov. 15, 1993?

Describe a safe, standards-based approach to verifying refrigerant recovery before opening a stationary appliance, then explain how the checks differ when verifying a recovery cylinder.

A high-pressure stationary appliance has a full charge of 200 lb or more, and the recovery equipment was made before Nov. 15, 1993. What endpoint does the table specify?

A very-high-pressure stationary appliance is being evacuated. Which endpoint does the table specify, regardless of whether the recovery equipment was made before or after November 15, 1993?

The evacuation table has separate columns for recovery equipment made before a certain date and equipment made on or after it. What is that dividing date?

A high-pressure stationary appliance has a full charge of 180 lb. The recovery equipment was made on or after November 15, 1993. What evacuation endpoint applies?

What evacuation endpoint does the table specify for a low-pressure stationary appliance? Enter the value in mm Hg absolute.

The 80%-by-volume fill condition used in EPA equipment test procedures is a universal field fill limit for every recovery cylinder.

True or false: The required evacuation endpoint before opening an appliance is the same as the deeper vacuum used to dehydrate a repaired system before charging.

True or false: Appliance age can never affect evacuation requirements or exceptions once the appliance's pressure class and full charge are known.