A benchmark has an elevation of ft. From one instrument setup, the backsight is ft and the foresight to a point is ft. What is the point’s elevation?
Differential Leveling: Elevations and Checks Online Quiz Questions
Use this free practice quiz with 20 questions to review Differential Leveling: Elevations and Checks, test your knowledge, and prepare for your next test or exam.
Select all statements that correctly describe elevation, benchmarks, and datum references.
- A
Elevation is the vertical position of a point relative to a stated datum.
- B
A benchmark is a stable survey mark with a known elevation.
- C
An assumed starting elevation ties the survey to an established vertical datum.
- D
A survey tied to a published benchmark has elevations related to that benchmark’s datum.
If ΣBS−ΣFS agrees with the ending elevation minus the starting elevation, the arithmetic check proves that the observations are error-free.
- A
True
- B
False
What is the standard term for the elevation of a level’s horizontal line of sight?
An elevation is the vertical position of a point relative to a stated . A stable survey mark with a known elevation is a .
Describe the main equipment used in differential leveling and distinguish a turning point, height of instrument, backsight, foresight, intermediate sight, and sideshot by their roles.
Across two setups, the backsights are 1.2 ft and 0.8 ft, and the foresights are 1.0 ft and 1.4 ft. Using change in elevation=ΣBS−ΣFS, what is the change in elevation?
- A
+0.4 ft
- B
+3.4 ft
- C
−0.4 ft
- D
−3.4 ft
Select all practices or statements that are supported for checking and documenting leveling work.
- A
Agreement between the arithmetic check results confirms the arithmetic, but does not prove the observations are error-free.
- B
When a line ends on a benchmark with known elevation, compare the calculated ending elevation with the known elevation.
- C
Check misclosure against the project’s specified tolerance; no single tolerance applies to every leveling job.
- D
Using the same closure tolerance for every leveling job is required.
- E
Keeping backsight and foresight distances reasonably balanced where practicable can help reduce line-of-sight error.
- F
Erasing original field-note entries is the recommended way to correct mistakes.
If a leveling survey starts from an assumed elevation, its results are tied to an established vertical datum.
- A
True
- B
False
Which instrument establishes a horizontal line of sight in a typical differential-leveling setup?
A point has a known elevation of 100.000 m. A backsight reading is 0.750 m, and a rod reading to another point from the same setup is 1.200 m. Enter each value in metres to three decimal places: the height of instrument is , and the other point’s elevation is .
A leveling arithmetic check shows that the change computed from the backsights and foresights matches the ending elevation minus the starting elevation. What does this agreement establish?
- A
Matching results prove that all rod readings were free of error.
- B
Matching results confirm the arithmetic but do not prove the observations were error-free.
- C
Matching results establish that the survey meets every project’s closure tolerance.
- D
Matching results mean a closure check against a known benchmark is unnecessary.
In differential leveling, height of instrument (HI) means the instrument’s physical height above the ground.
- A
True
- B
False
A leveling survey starts from an assumed elevation rather than a published benchmark. What kind of elevations does it produce, rather than elevations tied to an established vertical datum?
A leveling line ends on a benchmark with a known elevation. What is the misclosure?
- A
The difference between the backsight and foresight distances.
- B
The difference between the HI and the physical height of the instrument.
- C
The difference between the calculated ending elevation and the known ending-benchmark elevation.
- D
The sum of the intermediate sight readings.
Across a sequence of leveling setups, the change in elevation is calculated as ∑BS−∑FS.
- A
True
- B
False
An elevation is the vertical position of a point relative to a stated what?
Why should backsight and foresight distances be kept reasonably balanced where practicable?
- A
It guarantees that every rod reading is error-free.
- B
It helps reduce line-of-sight error and other systematic effects.
- C
It eliminates the need to check closure against project requirements.
- D
It makes the starting elevation independent of the datum.
What two-letter abbreviation identifies a rod reading to another point from the same instrument setup?
At the second setup in the example, TP1 has an elevation of 99.320 ft and the backsight on TP1 is 0.955 ft. What is the height of instrument? Choose one answer.
- A
99.320 ft
- B
99.995 ft
- C
100.275 ft
- D
100.585 ft
Related study packs and tools
- Study guide
1 Electrical Quantities and Ohm’s Law
Learn how charge, current, voltage, resistance, power, and energy are related in electric circuits, including how to apply Ohm’s law and interpret worked calculations.
- Flashcards
01 Foundations of Materials Science
Review how processing, structure, properties, and performance connect, and how engineering materials are classified and selected.
- Quiz
1 Vectors for Engineering Mechanics
A medium-difficulty quiz on representing vectors, calculating their components and magnitudes, and applying vector operations in engineering mechanics.
- Quiz
02 Atomic Bonding and Crystal Structures
A medium-difficulty quiz on atomic bonding, crystal structures, unit cells, and crystallographic notation. Questions progress from interpreting individual properties to applying and comparing structural concepts.
- Study guide
02 Atomic Bonding and Crystal Structures
Learn how atomic bonding relates to crystal order, how unit cells and Miller indices describe crystals, and how common metal and ceramic structures differ.
- Quiz
04 Mechanical Properties of Materials
A medium-difficulty quiz on how materials respond to stress, deformation, repeated loading, sustained loading, and flaws.
- Flashcards
06 Metals and Alloys
Review how metal structure, alloy composition, processing, heat treatment, and application requirements shape the properties and uses of engineering metals.
- Study guide
06 Metals and Alloys
Learn how metal structure, composition, processing, and heat treatment shape material properties, and how to select an alloy for an engineering application.
- Study guide
7 Engineering Ethics and Responsibility
Learn how engineers apply professional duties, ethical codes, safety practices, and community considerations to responsible engineering decisions.
- Study guide
08 Polymers
Learn how polymer chain structure, molecular-weight distribution, thermal behavior, and processing methods determine the properties and uses of polymer materials.
- Study guide
09 Composite Materials
Learn how composite materials combine constituents, how reinforcement arrangements shape their properties, and how to select them for particular applications.
- Quiz
10 Materials Selection and Design
A medium-difficulty quiz on applying materials-selection principles, evaluating candidates, and accounting for processing and service requirements.