Coordinate Systems and Positioning
A concise lesson on geographic, projected, and local coordinates, and the context needed to interpret a position correctly.
Reading Coordinates in Context
Coordinates need context
A assigns numbers to locations using defined axes and units. Numbers alone may not identify a point: a usable position record should also identify the , or datum, units, and measurement quality.
The main coordinate types represent locations in different ways:
Geographic coordinates use latitude and longitude, usually in degrees. The source example,
40.7128° N, 74.0060° W, includes hemisphere labels and degree units that help interpret the values.use planar values such as easting and northing, usually in meters or feet. Their projection and zone must be specified.
Local coordinates measure positions from a project-defined origin, such as a building corner or survey control point. Document the origin and the directions of the axes, as well as the units.
These details matter because coordinate values are meaningful only within their system. A pair of local values, for example, depends on where its origin was placed and which directions its axes follow.
Choosing and reading a system
can be useful for calculating local distances and areas, but the projection and zone must be known; values and units alone are not enough. Local coordinates are useful for small sites when the origin and axis directions are documented.
Before comparing positions or calculating distance or area, check that the and its necessary details are known. Do not treat coordinates as interchangeable just because they are written as numbers.