An order is to infuse 750 mL over 5 hours using tubing labeled 15 gtt/mL. What gravity drip rate should be set, rounded to a whole drop per minute?
Infusion Rate Calculations Online Quiz Questions
Use this free practice quiz with 20 questions to review Infusion Rate Calculations, test your knowledge, and prepare for your next test or exam.
Select all statements that correctly describe volume-based infusion pump settings and setup.
- A
For time in hours, calculate mL/hr by dividing the volume in mL by the time in hours.
- B
When time is in minutes, multiply the volume-per-minute rate by 60 to convert it to mL/hr.
- C
A pump setting must always be entered as a whole number, regardless of pump precision or local policy.
- D
Correct setup also depends on selecting the right medication, concentration, volume, and duration.
True or false: For the hypothetical order of 5 mcg/kg/min for a 70 kg patient, with a solution containing 400 mg in 250 mL, the calculated pump rate is 13.125 mL/hr. This is a math example, not a treatment recommendation.
- A
True
- B
False
What calculation method tracks units and checks that unwanted units cancel, leaving the requested units?
In dimensional analysis, arrange conversion factors so unwanted units and the requested units remain.
A volume of 250 mL is to be infused over 90 minutes. Calculate the volume-based pump rate in mL/hr, rounded to the nearest tenth.
A hypothetical order is 5 mcg/kg/min for a 70 kg patient, and the solution contains 400 mg in 250 mL. What is the calculated pump rate in mL/hr? This is a math example, not a treatment recommendation.
- A
1.3125 mL/hr
- B
8.4 mL/hr
- C
13.125 mL/hr
- D
21 mL/hr
Select all statements that correctly describe calculating and verifying a gravity infusion rate.
- A
Calculate gtt/min by multiplying volume in mL by the tubing’s labeled drop factor in gtt/mL, then dividing by time in minutes.
- B
Convert hours to minutes before using the gravity drip-rate formula.
- C
Use the drop factor printed for the specific tubing set rather than inferring it from the tubing’s appearance.
- D
Infer the drop factor from how the tubing looks if its package label is unavailable.
- E
After setting a gravity infusion, count drops over a full minute to verify the rate.
True or false: Dimensional analysis tracks units and checks that unwanted units cancel, leaving the requested units; this can help make unit errors easier to detect.
- A
True
- B
False
For the hypothetical order of 5 mcg/kg/min for a 70 kg patient, with a solution containing 400 mg in 250 mL, what is the unrounded calculated pump rate in mL/hr? This is a math example, not a treatment recommendation.
A volume of 250 mL is infused over 90 minutes. The pump rate is mL/hr.
A gravity infusion delivers 750 mL over 5 hours using tubing labeled 15 gtt/mL. What is the rate in whole drops per minute, following the supplied example?
- A
37.5 gtt/min
- B
Approximately 38 gtt/min
- C
45 gtt/min
- D
225 gtt/min
True or false: In an infusion calculation, writing units beside values and checking that unwanted units cancel can help verify that the result has the requested units.
- A
True
- B
False
A gravity infusion delivers 750 mL over 5 hours through tubing labeled 15 gtt/mL. Using the whole-drop rate shown by the supplied example, what rate in gtt/min should be set?
For the hypothetical order of 5 mcg/kg/min for a 70 kg patient, with a solution containing 400 mg in 250 mL, what is the calculated pump rate in mL/hr before rounding?
- A
1.3125 mL/hr
- B
13.1 mL/hr
- C
13.125 mL/hr
- D
131.25 mL/hr
What is the calculation method called when units are tracked through a calculation and conversion factors are arranged so unwanted units cancel?
Which method correctly calculates a concentration-based infusion pump rate in mL/hr from a dose-based order?
- A
Divide the dose per minute by the concentration without converting the time unit.
- B
Convert the ordered dose to an amount per hour, then divide by the solution concentration expressed as drug amount per volume.
- C
Multiply the solution concentration by the patient's weight, then divide by the infusion time in minutes.
- D
Divide the ordered volume by the patient's weight and report the result in gtt/min.
After setting a gravity infusion, which action does the material specify for verifying the rate?
- A
Assume the drop factor from the tubing's appearance and estimate the rate.
- B
Count drops for 15 seconds and report that count as drops per minute.
- C
Count drops over a full minute to verify the set rate.
- D
Use the pump's mL/hr setting to verify a gravity tubing rate.
An infusion order is for 750 mL over 5 hours, and the specific tubing set is labeled 15 gtt/mL. What gravity drip rate should be set, rounded to a whole drop per minute?
- A
25 gtt/min
- B
38 gtt/min
- C
150 gtt/min
- D
2250 gtt/min
For this math example, a hypothetical order is 5 mcg/kg/min for a 70 kg patient, and the solution contains 400 mg in 250 mL. What is the calculated pump rate in mL/hr before rounding?
- A
0.219 mL/hr
- B
8.75 mL/hr
- C
13.125 mL/hr
- D
21.875 mL/hr
Related study packs and tools
- Quiz
1 EMS Systems and Operations
A medium-difficulty quiz on EMS systems, clinician roles, medical direction, communications, and coordination among response partners.
NREMT Paramedic OperationsUpdated - Study guide
1 Scene Assessment and Emergency Priorities
Learn how to make an emergency scene safer, rapidly identify and address immediate threats to life, prioritize patients, and reassess as conditions change.
- Study guide
2 Immediate Stabilization Decisions
A practical guide to recognizing immediate threats, providing appropriate first aid while EMS is coming, and prioritizing emergency transport decisions.
- Flashcards
2 Mechanism of Injury and Nature of Illness
Learn how to assess scene safety, identify the mechanism of injury or nature of illness, and use findings to anticipate patient care and resource needs.
- Study guide
3 Hazardous Materials Awareness for EMS
Learn how awareness-level EMS responders recognize possible hazardous-materials releases, stay safe, communicate with incident command, and coordinate patient care without exceeding their role.
NREMT Paramedic OperationsUpdated - Quiz
4 Destination Decisions and Transport Planning
A medium-difficulty quiz on selecting and communicating an appropriate patient destination using patient needs, facility capabilities, travel conditions, and local protocols.
- Study guide
4 Destination Decisions and Transport Planning
Learn how to select and communicate a patient destination by matching clinical risk and likely care needs to facility capability, travel conditions, and local EMS protocols.
- Study guide
4 Patient Transport and Ambulance Operations
Learn how EMS teams move and secure patients, operate ambulances safely, choose destinations, and coordinate ground or air transport.
NREMT Paramedic OperationsUpdated - Study guide
4 Prioritize Hypotheses
Learn how to compare plausible explanations for a client’s findings and prioritize the concern that poses the greatest immediate risk.
- Quiz
5 Generate Solutions
A medium-difficulty quiz on setting measurable patient goals and selecting, implementing, and evaluating interventions that address the priority problem.
- Study guide
6 Take Action
Learn how to implement safe, prioritized nursing interventions, respond to deterioration, communicate concerns, and reassess patient outcomes.
- Quiz
8 Integrated NGN Case Studies
Practice applying the NGN clinical judgment steps, using common item formats, and interpreting client changes.