Infusion Rate Calculations
Learn to calculate infusion volume rates, convert between time units, and determine gravity-drip rates using the tubing drop factor.
Volume Rates and Gravity Drips
Start with the requested units
An tells how much fluid is delivered during a given time. For a specified volume and duration, calculate:
If the requested unit is milliliters per hour (mL/h), express the time in hours before dividing. For 500 mL over 4 hours:
The result means 125 mL is delivered each hour. Check that the units match the request and that the result is reasonable.
Convert time units before calculating
When a rate is given in a different time unit, convert it to the requested unit. Since 1 hour equals 60 minutes, convert 2.5 mL/min to mL/h by multiplying by 60 min/h:
The minutes cancel, leaving milliliters per hour. This unit cancellation is a useful check: the conversion factor must be oriented so the unwanted time unit cancels and the requested one remains.
Convert a volume rate to gravity drops
For gravity tubing, use the printed on the tubing. Calculate drops per minute (gtt/min) as:
For 75 mL/h with a of 15 gtt/mL:
Milliliters cancel against milliliters, and hours cancel when dividing by 60 min/h, leaving drops per minute. Because drops are counted as whole drops, 18.75 gtt/min is about 19 gtt/min when rounded to a whole drop. Use the shown on the tubing; medication orders and pump settings must be checked against product instructions and applicable clinical procedures.