A temporary incident has blocked a freeway lane and created a queue. Which strategy most directly addresses the disruption?
Roadway Capacity and Congestion Online Quiz Questions
Use this free practice quiz with 20 questions to review Roadway Capacity and Congestion, test your knowledge, and prepare for your next test or exam.
Select all statements that correctly describe level of service (LOS).
- A
Freeway LOS analysis commonly uses density.
- B
LOS grades range from A, generally free-flowing, through F, breakdown or highly congested conditions.
- C
LOS is a safety rating.
- D
LOS thresholds are universal, so the same speed or delay has the same meaning on every type of road.
- E
LOS should be interpreted alongside its underlying measure and local objectives.
True or false: Roadway capacity is the maximum sustainable rate at which vehicles can pass a point or travel along a roadway under prevailing conditions, and it can vary with those conditions.
- A
True
- B
False
What category of congestion results from a crash?
At a bottleneck, if demand temporarily exceeds the service rate, the queue . When demand falls below capacity, the queue can .
Distinguish recurring from nonrecurring congestion. Then name at least two measures agencies monitor besides traffic counts, and explain why counts alone may not reveal full demand or delay in congested conditions.
Which statement defines roadway capacity?
- A
The number of vehicles observed passing a point during a particular count period.
- B
The maximum sustainable rate at which vehicles can pass a point or travel along a roadway under prevailing conditions.
- C
A letter-based rating that summarizes traffic operating conditions.
- D
The number of vehicles waiting in a queue at a bottleneck.
Select all statements that correctly explain how to interpret LOS across different facilities.
- A
A particular speed or delay may have different meanings on different facilities.
- B
LOS is a universal grade that makes unlike roads directly comparable.
- C
LOS should be interpreted alongside its underlying measure and local objectives.
- D
A good LOS rating confirms that a roadway is safe.
True or false: Agencies should always widen a congested roadway without considering how the change may affect the surrounding network.
- A
True
- B
False
Using the relationship flow=density×speed, calculate flow for a density of 30 vehicles per mile per lane and a speed of 40 miles per hour. Enter the numerical value in vehicles per hour per lane.
Roadway capacity is the at which vehicles can pass a point or travel along a roadway under prevailing roadway, traffic, and control conditions.
A crash causes a queue on a roadway. Which description best classifies this congestion and identifies appropriate measures for assessing its effects?
- A
Recurring congestion, assessed only by the number of vehicles passing the point
- B
Nonrecurring congestion, assessed using measures such as speed, travel time, queue length, and incident duration
- C
Recurring congestion, assessed only by incident duration
- D
Nonrecurring congestion, which can be assessed only after traffic counts return to normal
Level of service summarizes traffic operating conditions, but it is not a safety rating.
- A
True
- B
False
Under the stated current conditions, a lane can serve 1,800 vehicles per hour while 2,000 vehicles per hour arrive. What is the excess arrival rate, in vehicles per hour?
When selecting a strategy to address congestion, which approach best reflects the role of the surrounding roadway network?
- A
Always widen the congested segment before considering other strategies.
- B
Choose a strategy based only on the delay measured at the congested segment.
- C
Match the strategy to the cause and location of congestion, while considering effects on the surrounding network.
- D
Avoid combining operational, demand-management, and infrastructure strategies.
Which measure does freeway analysis commonly use as the basis for a level-of-service rating?
Why might a traffic count at a point fail to show the full level of demand during congested conditions?
- A
Some vehicles seeking to pass the point may be waiting in a queue, so observed counts may be lower than full demand.
- B
Traffic counts include all vehicles that are waiting as well as those that pass the point.
- C
A traffic count directly measures queue length and incident duration.
- D
Observed counts are always greater than the number of vehicles seeking to pass.
Which statement best defines roadway capacity?
- A
The number of vehicles observed passing a point during a period, regardless of conditions
- B
The maximum sustainable rate at which vehicles can pass a point or travel along a roadway under prevailing roadway, traffic, and control conditions
- C
A letter-based rating of traffic operating conditions that also measures safety
- D
The total number of vehicles waiting in a queue at a bottleneck
During congestion, fewer vehicles pass a bottleneck than are seeking to pass it. What does this imply about using traffic counts to assess conditions?
- A
The observed count always equals the number of vehicles seeking to pass.
- B
The count may understate demand, so agencies should also monitor measures such as speed, travel time, and queue length.
- C
The count alone reveals the full extent of delay, but not the roadway’s speed.
- D
A lower observed count proves that the bottleneck has more capacity than demand requires.
At a bottleneck, demand temporarily exceeds the rate vehicles can pass through. What is expected if demand later falls below the bottleneck’s capacity?
- A
The queue grows whenever demand falls below capacity and clears when demand exceeds capacity.
- B
The queue grows only if the bottleneck’s capacity is fixed; it cannot clear when demand changes.
- C
The queue grows while demand exceeds the bottleneck’s capacity and can begin to clear when demand falls below it.
- D
The queue grows whenever vehicle speed remains high and clears only when speed falls to zero.
Related study packs and tools
- Study guide
1 Electrical Quantities and Ohm’s Law
Learn how charge, current, voltage, resistance, power, and energy are related in electric circuits, including how to apply Ohm’s law and interpret worked calculations.
- Flashcards
01 Foundations of Materials Science
Review how processing, structure, properties, and performance connect, and how engineering materials are classified and selected.
- Quiz
1 Vectors for Engineering Mechanics
A medium-difficulty quiz on representing vectors, calculating their components and magnitudes, and applying vector operations in engineering mechanics.
- Quiz
02 Atomic Bonding and Crystal Structures
A medium-difficulty quiz on atomic bonding, crystal structures, unit cells, and crystallographic notation. Questions progress from interpreting individual properties to applying and comparing structural concepts.
- Study guide
02 Atomic Bonding and Crystal Structures
Learn how atomic bonding relates to crystal order, how unit cells and Miller indices describe crystals, and how common metal and ceramic structures differ.
- Quiz
04 Mechanical Properties of Materials
A medium-difficulty quiz on how materials respond to stress, deformation, repeated loading, sustained loading, and flaws.
- Flashcards
06 Metals and Alloys
Review how metal structure, alloy composition, processing, heat treatment, and application requirements shape the properties and uses of engineering metals.
- Study guide
06 Metals and Alloys
Learn how metal structure, composition, processing, and heat treatment shape material properties, and how to select an alloy for an engineering application.
- Study guide
7 Engineering Ethics and Responsibility
Learn how engineers apply professional duties, ethical codes, safety practices, and community considerations to responsible engineering decisions.
- Study guide
08 Polymers
Learn how polymer chain structure, molecular-weight distribution, thermal behavior, and processing methods determine the properties and uses of polymer materials.
- Study guide
09 Composite Materials
Learn how composite materials combine constituents, how reinforcement arrangements shape their properties, and how to select them for particular applications.
- Quiz
10 Materials Selection and Design
A medium-difficulty quiz on applying materials-selection principles, evaluating candidates, and accounting for processing and service requirements.