Which statement best describes the general traffic-state pattern represented by fundamental diagrams?
Traffic Flow Fundamentals Online Quiz Questions
Use this free practice quiz with 20 questions to review Traffic Flow Fundamentals, test your knowledge, and prepare for your next test or exam.
For steady traffic with density 30 veh/mi/lane and space-mean speed 60 mi/h, select all statements that are correct.
- A
The flow is 1800 veh/h/lane.
- B
The flow is 90 veh/h/lane.
- C
The calculation uses space-mean speed in q=kus.
- D
The calculation must use the arithmetic average of speeds measured as vehicles pass a point, regardless of space-mean speed.
In the Greenshields model, combining the linear speed–density relationship with q=ku gives maximum flow at density k=2kj.
- A
True
- B
False
Complete each definition: Speed is ; flow is ; density is .
According to the Greenshields model, at what density does flow reach its maximum?
- A
k=0
- B
k=2kj
- C
k=kj
- D
k=2kj
Select all statements that correctly describe the general traffic-state pattern represented by fundamental diagrams.
- A
They represent speed–density, flow–density, and flow–speed relationships.
- B
They establish one fixed curve that applies identically under all roadway and operating conditions.
- C
In general, flow rises as density increases from a very low level until it reaches capacity at critical density.
- D
Beyond critical density, congestion causes speed and flow to fall as density continues to rise.
For steady traffic, the fundamental relationship calculates flow by multiplying density by the arithmetic average of speeds measured as vehicles pass a point.
- A
True
- B
False
What symbol denotes traffic flow in the fundamental traffic relationship?
For a reasonably steady traffic stream, complete the reciprocal approximations: flow is , and density is . Use consistent units.
Which option correctly distinguishes speed, flow, and density?
- A
Speed is the number of vehicles occupying a roadway length at an instant; flow is distance per unit time; density is the number passing a point per unit time.
- B
Speed is distance traveled per unit time; flow is the number of vehicles passing a point per unit time; density is the number of vehicles occupying a roadway length at an instant.
- C
Speed is the number of vehicles passing a point per unit time; flow is the number occupying a roadway length at an instant; density is distance traveled per unit time.
- D
Speed and flow both measure the number of vehicles occupying a roadway length, while density measures the distance vehicles travel per unit time.
At jam density, vehicles are effectively stopped and traffic flow approaches zero.
- A
True
- B
False
In the Greenshields model, maximum flow occurs at k=2kj. What is the density at maximum flow as a decimal proportion of jam density?
For steady traffic, the density is 30 veh/mi/lane and the space-mean speed is 60 mi/h. What is the flow?
- A
30 veh/h/lane
- B
90 veh/h/lane
- C
1800 veh/h/lane
- D
3600 veh/h/lane
Density is the number of vehicles passing a point per unit time.
- A
True
- B
False
For a reasonably steady traffic stream, a mean time headway of 2 seconds corresponds to approximately how many vehicles per hour passing the observation point? Enter a whole-number rate.
Which statement best describes the general flow–density pattern represented by fundamental diagrams? Treat it as a general model, not a universal fixed curve.
- A
As density rises, flow always increases, including beyond capacity, and speed remains unchanged.
- B
In general, flow rises from a very low density to a maximum at critical density, then falls as density continues to rise and congestion develops.
- C
Flow is at its maximum when vehicles are effectively stopped at jam density.
- D
Density decreases as flow increases, and the same fixed curve applies to every roadway and operating condition.
For steady traffic, density is 30 veh/mi/lane and space-mean speed is 60 mi/h. Using q=kus, what is the flow rate? Enter a whole number.
Under the Greenshields model, at what density does flow reach its maximum, in terms of jam density kj?
- A
k=0
- B
k=4kj
- C
k=kj
- D
k=2kj
In a reasonably steady traffic stream, the mean time headway is 3 seconds. What is the approximate flow past the observation point?
- A
Approximately 120 vehicles per hour
- B
Approximately 1,200 vehicles per hour
- C
Approximately 3,000 vehicles per hour
- D
Approximately 10,800 vehicles per hour
Which option correctly distinguishes traffic flow from traffic density?
- A
Flow is vehicles occupying a roadway length at an instant; density is distance traveled per unit time.
- B
Flow is distance traveled per unit time; density is vehicles passing a point per unit time.
- C
Flow is vehicles passing a point per unit time; density is vehicles occupying a roadway length at an instant.
- D
Flow is the distance between successive vehicles; density is the time between successive vehicles passing a point.
Related study packs and tools
- Study guide
1 Electrical Quantities and Ohm’s Law
Learn how charge, current, voltage, resistance, power, and energy are related in electric circuits, including how to apply Ohm’s law and interpret worked calculations.
- Flashcards
01 Foundations of Materials Science
Review how processing, structure, properties, and performance connect, and how engineering materials are classified and selected.
- Quiz
1 Vectors for Engineering Mechanics
A medium-difficulty quiz on representing vectors, calculating their components and magnitudes, and applying vector operations in engineering mechanics.
- Quiz
02 Atomic Bonding and Crystal Structures
A medium-difficulty quiz on atomic bonding, crystal structures, unit cells, and crystallographic notation. Questions progress from interpreting individual properties to applying and comparing structural concepts.
- Study guide
02 Atomic Bonding and Crystal Structures
Learn how atomic bonding relates to crystal order, how unit cells and Miller indices describe crystals, and how common metal and ceramic structures differ.
- Quiz
04 Mechanical Properties of Materials
A medium-difficulty quiz on how materials respond to stress, deformation, repeated loading, sustained loading, and flaws.
- Flashcards
06 Metals and Alloys
Review how metal structure, alloy composition, processing, heat treatment, and application requirements shape the properties and uses of engineering metals.
- Study guide
06 Metals and Alloys
Learn how metal structure, composition, processing, and heat treatment shape material properties, and how to select an alloy for an engineering application.
- Study guide
7 Engineering Ethics and Responsibility
Learn how engineers apply professional duties, ethical codes, safety practices, and community considerations to responsible engineering decisions.
- Study guide
08 Polymers
Learn how polymer chain structure, molecular-weight distribution, thermal behavior, and processing methods determine the properties and uses of polymer materials.
- Study guide
09 Composite Materials
Learn how composite materials combine constituents, how reinforcement arrangements shape their properties, and how to select them for particular applications.
- Quiz
10 Materials Selection and Design
A medium-difficulty quiz on applying materials-selection principles, evaluating candidates, and accounting for processing and service requirements.