In a transportation network graph, which description correctly distinguishes nodes, links, and connectors?
Transportation Networks and Performance Online Quiz Questions
Use this free practice quiz with 20 questions to review Transportation Networks and Performance, test your knowledge, and prepare for your next test or exam.
Select all statements that correctly describe paths and routes.
- A
A path is an ordered sequence of connected links between an origin and a destination.
- B
The shortest-distance route is always the fastest route.
- C
A route is a path selected for a trip, often considering factors such as travel time or reliability.
- D
A longer route with fewer stops may take less time than a shorter route through congested streets.
A trip takes 18 minutes during peak traffic and 10 minutes under the stated free-flow reference condition. The peak-period delay relative to that reference is 8 minutes. True or false?
- A
True
- B
False
What term names the pair of areas identifying a trip’s starting area and destination area?
The number of vehicles or people passing a point per unit time is called .
Describe how a transportation network graph represents nodes, links, and connectors. Include one example of a link attribute or connector and explain why a model may include operating features such as signals or schedules.
If each link’s cost is its expected travel time, how should two connected routes be compared to identify the faster route under that assumption?
- A
Choose the route with the shortest distance, because it must take the least time.
- B
Add the expected travel times of each route’s links and choose the route with the lower total, under the assumption that these are the link costs.
- C
Choose the route with the greatest number of links, because it provides more options.
- D
Treat geographic closeness of the origin and destination as proof that they are well connected.
Select all statements that correctly describe transportation performance measures.
- A
Throughput measures people or vehicles served or passing a point during a period.
- B
Queue length measures people or vehicles waiting, by count or distance.
- C
Reliability is simply the average travel time, so it cannot describe variation in travel times.
- D
Reliability describes the consistency and predictability of travel times across trips or days.
What is the standard term for a table summarizing trip counts between origin–destination area pairs during a specified period?
The average travel speed across a roadway segment is called .
A trip takes 18 minutes during peak traffic. Its stated free-flow reference time is 10 minutes. Which value is the peak-period delay relative to free flow?
- A
The peak-period travel time is 8 minutes.
- B
The trip’s speed is 8 miles per hour.
- C
The peak-period delay relative to free flow is 8 minutes.
- D
The route’s reliability is 8 minutes.
In a transportation graph, what are the connections between nodes called?
Which statement correctly distinguishes travel demand from link flow?
- A
Travel demand is the number of vehicles passing one point per unit time; link flow is the need or desire to make trips.
- B
Travel demand describes the need or desire to make trips; link flow describes movement concentrated on a particular network link.
- C
Travel demand and link flow are identical measures and always have the same unit.
- D
Travel demand is the number of vehicles occupying a unit road length; link flow is average travel speed across a segment.
Travel demand and traffic flow on a particular network link describe the same thing. True or false?
- A
True
- B
False
A lane carries 900 vehicles per hour at an average speed of 30 miles per hour. Assuming consistent measurements, what is the corresponding density? Enter a number in vehicles per mile.
A route has the shortest distance between two places. Which statement about its travel time is supported?
- A
It must be faster because it covers less distance.
- B
It must be slower because it covers less distance.
- C
It may be slower than a longer route if it passes through congested streets.
- D
Its speed cannot depend on stops or traffic conditions.
What performance measure describes how consistent and predictable travel times are across trips or days?
In a transportation network model, what do connectors represent?
- A
Points where travel begins or ends.
- B
Links representing access between parts of a model.
- C
Road segments that connect every pair of nodes and have no attributes.
- D
Measures of the number of trips made during a period.
In a transportation network model, what element represents the walk between a bus stop and a rail station?
- A
A node, because it marks a point where travel begins, ends, or changes direction or facility
- B
A link, because it connects two nodes along a road, rail line, or walkway
- C
A connector, because it represents access between parts of a model
- D
A link attribute, because it describes a connection's length or capacity
Which statement correctly distinguishes a path from a route in a transportation network?
- A
A path is selected for a trip based on travel costs; a route is any ordered sequence of connected links.
- B
A path is an ordered sequence of connected links; a route is a path selected for a trip.
- C
A path is always the shortest-distance option; a route is always the fastest option.
- D
A path connects places only when they are geographically close; a route describes mode-dependent connections.
Related study packs and tools
- Study guide
1 Electrical Quantities and Ohm’s Law
Learn how charge, current, voltage, resistance, power, and energy are related in electric circuits, including how to apply Ohm’s law and interpret worked calculations.
- Flashcards
01 Foundations of Materials Science
Review how processing, structure, properties, and performance connect, and how engineering materials are classified and selected.
- Quiz
1 Vectors for Engineering Mechanics
A medium-difficulty quiz on representing vectors, calculating their components and magnitudes, and applying vector operations in engineering mechanics.
- Quiz
02 Atomic Bonding and Crystal Structures
A medium-difficulty quiz on atomic bonding, crystal structures, unit cells, and crystallographic notation. Questions progress from interpreting individual properties to applying and comparing structural concepts.
- Study guide
02 Atomic Bonding and Crystal Structures
Learn how atomic bonding relates to crystal order, how unit cells and Miller indices describe crystals, and how common metal and ceramic structures differ.
- Quiz
04 Mechanical Properties of Materials
A medium-difficulty quiz on how materials respond to stress, deformation, repeated loading, sustained loading, and flaws.
- Flashcards
06 Metals and Alloys
Review how metal structure, alloy composition, processing, heat treatment, and application requirements shape the properties and uses of engineering metals.
- Study guide
06 Metals and Alloys
Learn how metal structure, composition, processing, and heat treatment shape material properties, and how to select an alloy for an engineering application.
- Study guide
7 Engineering Ethics and Responsibility
Learn how engineers apply professional duties, ethical codes, safety practices, and community considerations to responsible engineering decisions.
- Study guide
08 Polymers
Learn how polymer chain structure, molecular-weight distribution, thermal behavior, and processing methods determine the properties and uses of polymer materials.
- Study guide
09 Composite Materials
Learn how composite materials combine constituents, how reinforcement arrangements shape their properties, and how to select them for particular applications.
- Quiz
10 Materials Selection and Design
A medium-difficulty quiz on applying materials-selection principles, evaluating candidates, and accounting for processing and service requirements.