Timedora
Free Online Flashcard Deck

Conventional Machining Fundamentals Free Online Flashcards

Study Conventional Machining Fundamentals with 12 free online flashcards. Review key terms, definitions, and concepts with this interactive flashcard deck.

12 cards
01
Front

Why is conventional machining called subtractive?

Back

Conventional machining is subtractive: a cutting tool removes material from a workpiece to create a required shape, dimension, or surface.

02
Front

How does a sharp edge form a chip in conventional machining?

Back

A sharp cutting edge presses into the material and forms a chip through shearing and plastic deformation.

03
Front

What moves relative to what during machining?

Back

The cutting tool and workpiece move relative to one another; depending on the operation, either or both may move.

04
Front

What is the machine tool’s role in machining?

Back

The machine tool supports and controls the motions of the cutting tool and workpiece while resisting cutting forces.

05
Front

How do the cutting tool and workpiece interact to remove material?

Back

The cutting tool engages the workpiece; its sharp edge shears and plastically deforms material, producing a chip.

06
Front

How does a machine tool support controlled cutting?

Back

The machine tool controls the relative motions needed for the operation and provides support against cutting forces.

07
Front

Distinguish the cutting tool’s role from the machine tool’s role.

Back

The tool removes material from the workpiece, while the machine tool supports and controls their relative motion.

08
Front

Which component moves during machining: the tool or the workpiece?

Back

Depending on the machining operation, the tool may move, the workpiece may move, or both may move.

09
Front

What is the relationship between chip formation and material removal?

Back

A chip is produced as the cutting edge shears and plastically deforms material from the workpiece.

10
Front

Besides cutting, what other process can remove material in machining?

Back

Conventional machining removes material through controlled cutting; machining can also remove material through abrasion.

11
Front

What happens at the cutting edge during conventional machining?

Back

In conventional cutting, the cutting edge presses into the workpiece and shears and plastically deforms its material.

12
Front

What does the machine tool do when cutting forces act?

Back

The machine tool supports and controls the process motions and resists the forces created during cutting.