Timedora

How Conventional Machining Removes Material

A concise lesson on chip-forming and abrasive material removal, relative motion, and the roles of the machine tool, cutting tool, and workpiece.

Material Removal and the Machining System

How machining removes material

Machining is a subtractive process: it removes material from a workpiece to produce a desired shape, dimension, or surface. In conventional cutting, a sharp tool edge presses into the workpiece. The material shears and plastically deforms, separating as a chip. This is different from abrasive removal, in which abrasive grains remove small amounts of material, as in grinding.

The tool and workpiece must move relative to each other for cutting to occur. Depending on the operation, the tool, the workpiece, or both may move. For example, in turning, the workpiece rotates while a single-point tool advances along or across it. The motion between them lets the tool remove material along the intended path.

The machine tool supports and controls the required motions while resisting cutting forces. Together, the machine, tool, and workpiece form a system: controlled relative motion enables removal, while support helps maintain that motion under force.

A downward concept diagram has three nodes: Machine tool, Cutting tool, and Workpiece. Arrows from Machine tool to Cutting tool and Workpiece are labeled “supports motion.” A two-way arrow between Cutting tool and Workpiece is labeled “relative motion.”
The machine tool supports and controls motion while resisting cutting forces; the cutting tool and workpiece move relative to each other.
Text description

The machining system A downward concept diagram has three nodes: Machine tool, Cutting tool, and Workpiece. Arrows from Machine tool to Cutting tool and Workpiece are labeled “supports motion.” A two-way arrow between Cutting tool and Workpiece is labeled “relative motion.” Layout: down. Machine tool Cutting tool Workpiece Machine tool → Cutting tool (supports motion) Machine tool → Workpiece (supports motion) Cutting tool ↔ Workpiece (relative motion)