How Forming Reshapes Materials
Explains how forming permanently reshapes a workpiece and which material properties determine whether it can be formed without cracking.
Plastic deformation and formability
Plastic deformation and formability
Forming changes a workpiece’s shape through permanent (plastic) deformation, usually without intentionally removing material. Tools apply force by pressing, pulling, or rolling the workpiece. Unlike a cutting operation, the aim is to reshape the material rather than remove it.
Whether the workpiece can take the intended shape depends on its formability—how well it can deform under the chosen conditions without cracking. Ductility matters because the material must tolerate shape change; strength affects the force needed to deform it. Temperature also matters: hot working generally permits greater deformation with lower forming forces, while cold working can improve dimensional accuracy and increase strength through work hardening. The material must also flow in a way the tooling can control without cracking.
These factors work together. A process and tool setup that can shape one material or part may not suit another. Forming is successful when the material can sustain the required flow and the tools can guide it into the desired shape.