Timedora
Free Online Flashcard Deck

Manufacturing Process Selection and Planning Free Online Flashcards

Study Manufacturing Process Selection and Planning with 12 free online flashcards. Review key terms, definitions, and concepts with this interactive flashcard deck.

12 cards
01
Front

What is a manufacturing process route?

Back

A process route is a sequence of compatible operations chosen to make a part, often combining primary and secondary processes.

02
Front

Why avoid tolerances tighter than function and assembly require?

Back

Tighter tolerances generally increase manufacturing and inspection effort. Specify only the accuracy required for function and assembly.

03
Front

Which material property helps determine suitability for forming?

Back

Ductility affects whether a material can be formed; check that the material and its condition suit the intended forming process.

04
Front

Which material characteristics affect cutting-process suitability?

Back

Hardness and machinability affect how readily a material can be cut, so both matter when selecting machining processes.

05
Front

What material compatibility checks matter for welding and adhesive bonding?

Back

Check weldability for welding and adhesive compatibility for adhesive bonding before choosing a joining process.

06
Front

Which process may suit a long, uniform section?

Back

Long, uniform sections may suit extrusion because their geometry is consistent along the length.

07
Front

What process family may suit sheet-like parts?

Back

Sheet-like parts may suit forming and stamping, subject to the part geometry and process requirements.

08
Front

Why can tooling-intensive forming suit high, repeatable production volumes?

Back

Tooling-intensive forming can become economical at high, repeatable volumes because the tooling cost is spread across many parts.

09
Front

Why can machining be attractive for prototypes or small batches?

Back

Flexible machining can avoid dedicated tooling costs and lead time, making it useful for prototypes and small batches.

10
Front

When should a secondary operation be added to a process route?

Back

If the primary process cannot meet required accuracy or surface condition, add a suitable secondary operation, such as machining or grinding.

11
Front

What costs and production factors belong in a process-route comparison?

Back

Compare material use, tooling and setup, cycle time, labor, scrap, finishing, inspection, equipment availability, and delivery lead time.

12
Front

What should happen to a route that fails a critical requirement?

Back

Reject any route that fails a critical requirement, then compare the remaining feasible routes.