Timedora
Free Online Flashcard Deck

Material Performance and Failure Free Online Flashcards

Study Material Performance and Failure with 12 free online flashcards. Review key terms, definitions, and concepts with this interactive flashcard deck.

12 cards
01
Front

Does average stress below tensile strength guarantee component safety?

Back

No. Average stress below tensile strength does not rule out permanent deformation, cracking, or failure.

02
Front

What should material test data represent?

Back

Use data that represent the component’s relevant service conditions; properties measured in one setting may not predict behavior in another.

03
Front

Why does load mode matter when evaluating a material?

Back

Tension, compression, shear, torsion, bending, or combinations can produce different responses; service loading may be multiaxial.

04
Front

How can load history affect material performance?

Back

A steady load, repeated cycles, impact, or changing load sequence can lead to different deformation and failure modes.

05
Front

Why should test rate reflect the component’s service conditions?

Back

Rapid loading can change measured strength and ductility compared with slow loading, so test rate should reflect service conditions.

06
Front

When should creep or time-dependent damage be considered?

Back

Elevated temperature and long duration can make creep or other time-dependent damage important.

07
Front

How can notches, holes, or surface defects affect a component?

Back

Notches, holes, rough surfaces, and defects can raise local stresses and encourage crack initiation.

08
Front

Name factors beyond applied load that can alter material performance.

Back

Chemical or thermal exposure, residual stress, manufacturing, and prior deformation can alter material performance.

09
Front

What failure mode matters for a component facing millions of load cycles?

Back

A component exposed to millions of cycles needs evaluation for fatigue, even if each load is below the stress that causes immediate yielding.

10
Front

What should be evaluated for a component holding a load at high temperature?

Back

Consider creep: sustained load over time, especially at elevated temperature, can cause excessive deformation or failure.

11
Front

What matters when a component must tolerate a crack-like defect?

Back

Evaluate crack-related failure and use fracture properties appropriate to the test conditions; tensile strength alone does not show resistance to crack growth.

12
Front

What can tensile testing reveal about a material?

Back

Tensile testing produces a stress–strain curve and can provide elastic modulus, yield strength, tensile strength, and measures of ductility.