A short, intense storm falls on compacted soil that is not already saturated. Which process is most likely to produce runoff when rainfall arrives faster than the soil can absorb it?
Runoff and Storm Hydrographs Online Quiz Questions
Use this free practice quiz with 20 questions to review Runoff and Storm Hydrographs, test your knowledge, and prepare for your next test or exam.
Select all statements that accurately describe the NRCS Curve Number method.
- A
It estimates storm runoff depth using rainfall and a curve number representing land cover and soil conditions.
- B
It fully describes the pathways and timing of streamflow.
- C
A higher curve number generally indicates less potential retention and more runoff for a given storm.
- D
A higher curve number generally indicates more potential retention and less runoff for a given storm.
On a storm hydrograph, discharge rises along the recession limb as storm runoff reaches the stream.
- A
True
- B
False
What two-word term describes how wet the ground was before a storm?
For a given storm, a higher curve number generally indicates potential retention and runoff.
Explain how infiltration-excess runoff differs from saturation-excess runoff. Then describe how shallow subsurface flow can reach a stream.
Two watersheds receive the same short, intense storm. One is paved and compacted, with surfaces connected to storm drains. What stream response is most likely in that watershed compared with a vegetated watershed with permeable soil?
- A
A later, broader peak because connected drains increase water storage in the watershed
- B
An earlier, sharper peak because runoff reaches the stream rapidly
- C
No change in the stream response because land cover does not affect runoff
- D
A lower peak and longer time to peak because pavement increases infiltration
Select all statements that correctly interpret a storm hydrograph.
- A
Discharge is the volume of water passing a point in a stream per unit time.
- B
Time to peak is the interval from a storm reference point to peak discharge.
- C
The recession limb shows discharge increasing as rapid runoff diminishes.
- D
Runoff volume is represented by the area under the storm-response curve after accounting for baseflow.
The NRCS Curve Number method provides a complete description of streamflow pathways and timing.
- A
True
- B
False
What is the name of the empirical planning method that estimates storm runoff depth using rainfall and a curve number?
On a storm hydrograph, the segment where discharge increases as storm runoff reaches the stream is the . The segment where discharge declines as rapid runoff diminishes and slower drainage continues is the .
After prolonged rain, a low-lying area near a stream is already saturated. Additional water cannot readily infiltrate and flows toward the channel. What is this runoff process called?
- A
Infiltration-excess runoff
- B
Saturation-excess runoff
- C
Baseflow
- D
Evaporation
Steeper slopes often move surface water downslope faster, but slope alone determines how much runoff forms in a watershed.
- A
True
- B
False
A hydrograph plots stream discharge against what quantity on its horizontal axis?
Which term names the highest streamflow reached during a storm event?
- A
Rising limb
- B
Time to peak
- C
Peak discharge
- D
Runoff volume
For a given storm, a higher curve number generally indicates less potential retention and more estimated runoff.
- A
True
- B
False
What two-word term names the highest flow during a storm event?
Which condition can cause infiltration-excess runoff?
- A
Rain arrives faster than the soil can absorb it.
- B
Soil is already saturated and cannot readily infiltrate more water.
- C
Groundwater discharge sustains streamflow between storms.
- D
Infiltrated water moves sideways through soil to a stream.
What two-word quantity does the NRCS Curve Number method estimate from rainfall and a curve number?
Infiltrated water moves sideways through soil and reaches a stream, contributing to stormflow even though little water runs over the land surface. What is this pathway called?
- A
Baseflow
- B
Shallow subsurface flow
- C
Infiltration-excess runoff
- D
Evaporation
Related study packs and tools
- Study guide
1 Electrical Quantities and Ohm’s Law
Learn how charge, current, voltage, resistance, power, and energy are related in electric circuits, including how to apply Ohm’s law and interpret worked calculations.
- Flashcards
01 Foundations of Materials Science
Review how processing, structure, properties, and performance connect, and how engineering materials are classified and selected.
- Quiz
1 Vectors for Engineering Mechanics
A medium-difficulty quiz on representing vectors, calculating their components and magnitudes, and applying vector operations in engineering mechanics.
- Quiz
02 Atomic Bonding and Crystal Structures
A medium-difficulty quiz on atomic bonding, crystal structures, unit cells, and crystallographic notation. Questions progress from interpreting individual properties to applying and comparing structural concepts.
- Study guide
02 Atomic Bonding and Crystal Structures
Learn how atomic bonding relates to crystal order, how unit cells and Miller indices describe crystals, and how common metal and ceramic structures differ.
- Quiz
04 Mechanical Properties of Materials
A medium-difficulty quiz on how materials respond to stress, deformation, repeated loading, sustained loading, and flaws.
- Flashcards
06 Metals and Alloys
Review how metal structure, alloy composition, processing, heat treatment, and application requirements shape the properties and uses of engineering metals.
- Study guide
06 Metals and Alloys
Learn how metal structure, composition, processing, and heat treatment shape material properties, and how to select an alloy for an engineering application.
- Study guide
7 Engineering Ethics and Responsibility
Learn how engineers apply professional duties, ethical codes, safety practices, and community considerations to responsible engineering decisions.
- Study guide
08 Polymers
Learn how polymer chain structure, molecular-weight distribution, thermal behavior, and processing methods determine the properties and uses of polymer materials.
- Study guide
09 Composite Materials
Learn how composite materials combine constituents, how reinforcement arrangements shape their properties, and how to select them for particular applications.
- Quiz
10 Materials Selection and Design
A medium-difficulty quiz on applying materials-selection principles, evaluating candidates, and accounting for processing and service requirements.