How can vegetated riparian buffers help protect a watershed?
Stormwater Runoff and Watershed Protection Online Quiz Questions
Use this free practice quiz with 20 questions to review Stormwater Runoff and Watershed Protection, test your knowledge, and prepare for your next test or exam.
Select all effects that roads, rooftops, and parking lots can have on runoff.
- A
They reduce infiltration.
- B
They make more water soak into the soil.
- C
They can send more water to drains and streams.
- D
They can increase peak flows and flooding.
Vegetated swales can slow runoff and allow sediment to settle; where soils permit, some water may infiltrate.
- A
True
- B
False
What term describes pollution carried by runoff from many scattered places?
Gutters, storm drains, pipes, and detention or retention basins are examples of infrastructure.
What is a common function of gray infrastructure such as gutters, storm drains, pipes, and basins?
- A
It always removes every pollutant from runoff.
- B
It makes infiltration safe at every site.
- C
It can convey or temporarily store runoff.
- D
It replaces the need to inspect and maintain stormwater systems.
Roads, rooftops, and parking lots usually increase infiltration and slow the movement of runoff into streams.
- A
True
- B
False
What green-infrastructure practice allows water to pass through its surface into an underlying stone or soil layer?
Vegetation intercepts rainfall, and soil absorbs water, allowing some water to and move slowly toward groundwater and streams. Impervious surfaces send more water into waterways more quickly, increasing peak flows, flooding, and streambank .
A site’s soil and groundwater conditions make infiltration risky. Which design approach best reflects sound stormwater planning?
- A
Require infiltration at every site, regardless of soil or groundwater conditions.
- B
Use filtration, storage, or controlled drainage when site conditions make infiltration risky.
- C
Avoid inspection and maintenance so the system remains undisturbed.
- D
Use only isolated installations rather than connecting practices across the watershed.
True or false: Infiltration is not suitable at every site; soil conditions, groundwater, or contamination can make it risky.
- A
True
- B
False
What term describes pollution carried by runoff from many scattered places?
Which action helps prevent soil from washing off a construction site and into waterways?
- A
Leave exposed construction soil uncovered during rainfall.
- B
Wait for sediment to enter the creek before trying to remove it.
- C
Cover or stabilize exposed soil and use erosion and sediment controls.
- D
Add more pavement around the construction site.
True or false: Roads, rooftops, and parking lots generally increase infiltration and slow the delivery of runoff to streams.
- A
True
- B
False
Name one type of structure that captures roof runoff for later use.
Why is pollution carried by runoff from many scattered places called nonpoint-source pollution?
- A
It comes only from one identified pipe, so it is called point-source pollution.
- B
It is carried by runoff from many scattered places, so it is called nonpoint-source pollution.
- C
It is created only when sediment settles at the bottom of a stream.
- D
It is pollution that storm drains always remove before water reaches a stream.
What is the term for a strip of vegetation beside a stream that can trap sediment and reduce direct runoff to the channel?
Which example shows green and gray infrastructure working together?
- A
A rain garden manages frequent rainfall while a storm-drain network conveys larger flows.
- B
A storm-drain network treats all runoff, so green infrastructure is never needed.
- C
A rain garden must handle every flow, including the largest, without other infrastructure.
- D
Green and gray systems should be isolated from one another.
A construction site has exposed soil that could wash into a nearby stream. Which action most directly helps prevent this soil from washing away?
- A
Install a rain barrel to capture roof runoff for later use.
- B
Cover or stabilize exposed soil and use erosion and sediment controls.
- C
Sweep nearby streets and parking areas to remove debris.
- D
Use a vegetated buffer beside a stream to trap sediment before it reaches the channel.
Which green-infrastructure practice collects runoff and filters it by passing it through plants and soil?
- A
A rain barrel that captures roof runoff for later use.
- B
Permeable pavement that lets water pass into an underlying layer.
- C
A rain garden that collects runoff and passes it through plants and soil.
- D
A vegetated swale that slows runoff so sediment can settle.
Related study packs and tools
- Study guide
1 Electrical Quantities and Ohm’s Law
Learn how charge, current, voltage, resistance, power, and energy are related in electric circuits, including how to apply Ohm’s law and interpret worked calculations.
- Flashcards
01 Foundations of Materials Science
Review how processing, structure, properties, and performance connect, and how engineering materials are classified and selected.
- Quiz
1 Vectors for Engineering Mechanics
A medium-difficulty quiz on representing vectors, calculating their components and magnitudes, and applying vector operations in engineering mechanics.
- Quiz
02 Atomic Bonding and Crystal Structures
A medium-difficulty quiz on atomic bonding, crystal structures, unit cells, and crystallographic notation. Questions progress from interpreting individual properties to applying and comparing structural concepts.
- Study guide
02 Atomic Bonding and Crystal Structures
Learn how atomic bonding relates to crystal order, how unit cells and Miller indices describe crystals, and how common metal and ceramic structures differ.
- Quiz
04 Mechanical Properties of Materials
A medium-difficulty quiz on how materials respond to stress, deformation, repeated loading, sustained loading, and flaws.
- Flashcards
06 Metals and Alloys
Review how metal structure, alloy composition, processing, heat treatment, and application requirements shape the properties and uses of engineering metals.
- Study guide
06 Metals and Alloys
Learn how metal structure, composition, processing, and heat treatment shape material properties, and how to select an alloy for an engineering application.
- Study guide
7 Engineering Ethics and Responsibility
Learn how engineers apply professional duties, ethical codes, safety practices, and community considerations to responsible engineering decisions.
- Study guide
08 Polymers
Learn how polymer chain structure, molecular-weight distribution, thermal behavior, and processing methods determine the properties and uses of polymer materials.
- Study guide
09 Composite Materials
Learn how composite materials combine constituents, how reinforcement arrangements shape their properties, and how to select them for particular applications.
- Quiz
10 Materials Selection and Design
A medium-difficulty quiz on applying materials-selection principles, evaluating candidates, and accounting for processing and service requirements.