Timedora
Free Online Flashcard Deck

Fluid Properties and Dimensional Analysis Free Online Flashcards

Study Fluid Properties and Dimensional Analysis with 12 free online flashcards. Review key terms, definitions, and concepts with this interactive flashcard deck.

12 cards
01
Front

What dimensional check must an equation satisfy?

Back

Both sides of an equation must have matching dimensions, and all terms being added must share the same dimensions.

02
Front

What does surface tension measure?

Back

Surface tension is the force exerted along a liquid interface per unit length. Its SI unit is N/m\mathrm{N/m}.

03
Front

Define density and give its SI unit.

Back

Density is mass per unit volume: ρ=mV\rho=\frac{m}{V}. Its SI unit is kg/m3\mathrm{kg/m^3}.

04
Front

How are bulk modulus and isothermal compressibility related?

Back

Bulk modulus is the reciprocal of isothermal compressibility: KT=1βTK_T=\frac{1}{\beta_T}. A larger bulk modulus means the fluid is harder to compress.

05
Front

For a Newtonian fluid, how does dynamic viscosity relate shear stress to velocity gradient?

Back

For one-dimensional shear in a Newtonian fluid, τ=μdudy\tau=\mu\frac{du}{dy}, where τ\tau is shear stress and dudy\frac{du}{dy} is the velocity gradient.

06
Front

When are surface-tension effects especially important?

Back

Surface-tension effects are especially important at small length scales and influence droplets, bubbles, and curved liquid surfaces.

07
Front

Define specific gravity and state whether it has dimensions.

Back

Specific gravity is SG=ρρref\mathrm{SG}=\frac{\rho}{\rho_{\mathrm{ref}}}, the fluid density divided by the density of a stated reference fluid. It is dimensionless.

08
Front

Why does isothermal compressibility include a minus sign?

Back

The minus sign makes βT=−1V(∂V∂p)T\beta_T=-\frac{1}{V}\left(\frac{\partial V}{\partial p}\right)_T positive for ordinary fluids, whose volume usually decreases as pressure increases.

09
Front

Why are the dimensions of ρg\rho g consistent with specific weight?

Back

For example, ρg\rho g has dimensions (ML−3)(LT−2)=ML−2T−2(ML^{-3})(LT^{-2})=ML^{-2}T^{-2}, which matches the dimensions of specific weight.

10
Front

What are the SI unit and dimensions of dynamic viscosity?

Back

Dynamic viscosity has SI unit Pa⋅s\mathrm{Pa\cdot s} and dimensions ML−1T−1ML^{-1}T^{-1}.

11
Front

What is the specific gravity for 850 kg/m3850\,\mathrm{kg/m^3} relative to water at 1000 kg/m31000\,\mathrm{kg/m^3}?

Back

With water at the stated nominal density of 1000 kg/m31000\,\mathrm{kg/m^3} as reference, a fluid of density 850 kg/m3850\,\mathrm{kg/m^3} has SG=0.85\mathrm{SG}=0.85.

12
Front

What energy-based unit is dimensionally equivalent to N/m\mathrm{N/m} for surface tension?

Back

Surface tension can also be expressed as energy per unit area, J/m2\mathrm{J/m^2}, which is dimensionally equivalent to N/m\mathrm{N/m}.