True or false: A flow can be steady while being nonuniform, because steady flow may have different velocities at different locations.
Fluid Flow and Continuity Online Quiz Questions
Use this free practice quiz with 20 questions to review Fluid Flow and Continuity, test your knowledge, and prepare for your next test or exam.
For steady flow through a tube with no leaks or accumulation, what rate is the same at each cross-section, even if the fluid’s density changes?
For uniform flow perpendicular to a cross-section, the volume flow rate is given by .
Explain what each of these classifications describes: steady or unsteady, uniform or nonuniform, and laminar or turbulent. Give one example of how classifications from these groups can apply to the same flow.
True or false: In a steady flow through a tube with no leaks or accumulation, volume flow rate must be the same at every cross-section even when fluid density changes.
- A
True
- B
False
What is the name of the curve that joins fluid particles that have passed through the same fixed point?
A description assigning a velocity vector to every position and time is a . A curve tangent to the instantaneous velocity vector at every point is a .
At every fixed location in a flow, velocity remains constant over time, but velocity differs from point to point. The fluid moves in orderly layers with limited mixing. Which classification fits this flow?
- A
Steady, nonuniform, and laminar
- B
Unsteady, uniform, and turbulent
- C
Steady, uniform, and turbulent
- D
Unsteady, nonuniform, and laminar
For uniform flow perpendicular to a cross-section, the volume flow rate equals the cross-sectional area multiplied by the flow speed.
- A
True
- B
False
A constant-density fluid flows steadily through a tube with no leaks or accumulation. At one cross-section, the area is 0.020 m2 and the average velocity is 0.50 m/s, uniform and perpendicular to the section. What is the volume flow rate? Enter the value in m^3/s.
Which description defines a streakline?
- A
A curve tracing the trajectory of one fluid particle over time
- B
A curve joining particles that have passed through the same fixed point
- C
A curve that always differs from a streamline, even in steady flow
- D
A curve tangent to the instantaneous velocity vector at every point
For steady flow through a tube with no leaks or accumulation, mass flow rate is the same at every cross-section, even if the fluid density changes.
- A
True
- B
False
What is the time-based classification of a flow in which velocity at every fixed location does not change with time?
In an unsteady flow, what relationship may hold among streamlines, pathlines, and streaklines?
- A
They must coincide, because the velocity is changing with time.
- B
A streakline is the trajectory of a single particle, while a pathline joins particles passing through a fixed point.
- C
They may differ, because velocity at a fixed location changes with time.
- D
They must coincide whenever velocity is nonzero.
What is the term for a curve tangent to the instantaneous velocity vector at every point?
Which expression gives the volume flow rate through a cross-section for a general velocity distribution, where n is the surface's outward normal?
- A
Q=∫Av⋅ndA
- B
Q=∫A∣v∣dA, regardless of the direction of the velocity
- C
Q=A∣n∣
- D
Q=∫Av⋅dA, without a surface normal
How are streamlines, pathlines, and streaklines related in steady flow?
- A
They coincide only in unsteady flow.
- B
They coincide in steady flow, but may differ in unsteady flow.
- C
They coincide whenever the flow is laminar.
A fluid moves in orderly layers with limited mixing, but its velocity changes smoothly over time at a fixed location. Which classification is supported?
- A
It is steady and turbulent because the velocity changes over time.
- B
It is unsteady and turbulent because any time variation creates eddies.
- C
It is unsteady and can still be laminar.
Where velocity is defined and nonzero, why can streamlines not cross?
- A
A crossing would assign two directions of motion to the same point at the same instant.
- B
A crossing would make the fluid's speed zero at that point.
- C
A crossing would mean the velocity field changes with time.
Water flows uniformly and perpendicular to a pipe cross-section of area 0.00785 m2 at an average speed of 0.40 m/s. What is the volume flow rate?
- A
0.000314 m3/s
- B
0.00314 m3/s
- C
0.0314 m3/s
Related study packs and tools
- Study guide
1 Electrical Quantities and Ohm’s Law
Learn how charge, current, voltage, resistance, power, and energy are related in electric circuits, including how to apply Ohm’s law and interpret worked calculations.
- Flashcards
01 Foundations of Materials Science
Review how processing, structure, properties, and performance connect, and how engineering materials are classified and selected.
- Quiz
1 Vectors for Engineering Mechanics
A medium-difficulty quiz on representing vectors, calculating their components and magnitudes, and applying vector operations in engineering mechanics.
- Quiz
02 Atomic Bonding and Crystal Structures
A medium-difficulty quiz on atomic bonding, crystal structures, unit cells, and crystallographic notation. Questions progress from interpreting individual properties to applying and comparing structural concepts.
- Flashcards
04 Mechanical Properties of Materials
Review how materials respond to forces and deformation, and how strength, fracture, fatigue, creep, and hardness are assessed.
- Quiz
04 Mechanical Properties of Materials
A medium-difficulty quiz on how materials respond to stress, deformation, repeated loading, sustained loading, and flaws.
- Flashcards
06 Metals and Alloys
Review how metal structure, alloy composition, processing, heat treatment, and application requirements shape the properties and uses of engineering metals.
- Study guide
06 Metals and Alloys
Learn how metal structure, composition, processing, and heat treatment shape material properties, and how to select an alloy for an engineering application.
- Study guide
7 Engineering Ethics and Responsibility
Learn how engineers apply professional duties, ethical codes, safety practices, and community considerations to responsible engineering decisions.
- Study guide
08 Polymers
Learn how polymer chain structure, molecular-weight distribution, thermal behavior, and processing methods determine the properties and uses of polymer materials.
- Study guide
09 Composite Materials
Learn how composite materials combine constituents, how reinforcement arrangements shape their properties, and how to select them for particular applications.
- Quiz
10 Materials Selection and Design
A medium-difficulty quiz on applying materials-selection principles, evaluating candidates, and accounting for processing and service requirements.