A failed sensor allowed repeated permit exceedances. Which response best addresses both the immediate problem and the risk of recurrence?
Corrective Action and Root-Cause Analysis Online Quiz Questions
Use this free practice quiz with 20 questions to review Corrective Action and Root-Cause Analysis, test your knowledge, and prepare for your next test or exam.
Select all elements that commonly belong in a complete corrective-action response.
- A
Use containment or interim controls while preparing a permanent fix.
- B
Analyze underlying causes, not just the direct event.
- C
Repair the immediate fault and treat that alone as sufficient.
- D
Document actions, responsible owners, deadlines, and resources.
- E
Keep evidence of implementation and test whether the actions work.
- F
Skip reviewing similar risks elsewhere.
Correction and corrective action mean the same thing: both address only the immediate noncompliant condition.
- A
True
- B
False
What process distinguishes a direct event from the underlying causes of a noncompliant condition?
Correction addresses the immediate noncompliant condition; corrective action also addresses it happened and how to reduce recurrence risk.
After a corrective-action plan is implemented, what should be retained and what should be tested to verify that the response is effective?
Which documented action-plan entry best supports clear responsibility and follow-through?
- A
List only the immediate repair, with no responsible owner.
- B
Identify a general goal but omit deadlines and resources.
- C
Specify actions, responsible owners, deadlines, and resources.
- D
Record completed actions only after the plan is finished.
Select all examples of underlying causes that a root-cause analysis may investigate.
- A
Unclear procedures
- B
The direct event alone, without considering other causes
- C
Insufficient training
- D
Poor maintenance
- E
A permit exceedance as the only possible explanation
- F
Inadequate oversight
Regulators and prosecutors may consider the quality of root-cause analysis and remediation when evaluating a compliance response.
- A
True
- B
False
What term names temporary measures used to protect people and the environment while a permanent fix is prepared? Enter either accepted term.
Complete the distinction: addresses the immediate noncompliant condition, while also addresses why it happened and how to reduce recurrence risk.
Which description best distinguishes corrective action from a repair that addresses only the immediate problem?
- A
Repairing the immediate problem, without investigating its cause
- B
Addressing the immediate condition and why it happened, then reducing the risk of recurrence
- C
Preserving records without addressing the noncompliant condition
- D
Waiting for another violation before changing procedures
Replacing a failed sensor is always sufficient corrective action, even if its calibration and alarm procedures are not reviewed.
- A
True
- B
False
What is the exact term for investigating a direct event and distinguishing it from underlying causes?
What should a documented corrective-action plan specify?
- A
A description of the direct event alone
- B
A list of possible causes without assigned responsibilities
- C
Actions, responsible owners, deadlines, resources, and any required communications
- D
Evidence that a repair was completed, without a plan for follow-up
A complete corrective response retains evidence that planned actions were completed and tests whether they resolved the condition and prevent recurrence.
- A
True
- B
False
What exact term describes a response that addresses why a noncompliant condition happened and reduces the risk of recurrence?
A failed sensor allowed repeated permit exceedances. Which response addresses both the immediate problem and recurrence risk?
- A
Replace the sensor and close the response once it operates again
- B
Replace the sensor, review calibration and alarm procedures, check earlier readings, train operators, and test revised controls
- C
Train operators but leave the sensor and alarm procedures unchanged
- D
Check earlier readings but take no action on the sensor or procedures
What exact term describes revising procedures, training, equipment, monitoring, or oversight as needed and reviewing for similar risks elsewhere?
What is the purpose of containment or interim controls during a corrective response?
- A
Determine who owns the permanent repair
- B
Test whether revised controls prevent recurrence
- C
Protect people and the environment while a permanent fix is prepared
- D
Review earlier measurements to identify when the condition began
Related study packs and tools
1 Low-Pressure Appliances and Chiller Fundamentals
A medium-difficulty quiz on low-pressure chiller operation and service practices, from practical precautions to applied reasoning.
2 Safety and Service Preparation
A practical guide to preparing safely for low-pressure refrigeration service by assessing hazards, identifying refrigerant, checking equipment, and planning recovery and evacuation.
3 EPA Section 608 Type I Requirements
Review EPA Section 608 Type I certification scope, small-appliance criteria, and refrigerant recovery requirements.
3 EPA Section 608 Type I Requirements
A medium-difficulty quiz on EPA Section 608 Type I certification scope, small-appliance criteria, and refrigerant handling requirements.
3 Refrigerant Recovery Procedures
A quiz on safe setup, operation, and completion of refrigerant recovery for low-pressure appliances.
3 Refrigerant Recovery Procedures
Learn how to prepare, connect, and operate recovery equipment for low-pressure appliances while protecting refrigerant quality and handling cylinders safely.
4 Evacuation and Dehydration Procedures
A quiz on safe evacuation, dehydration, and vacuum verification for refrigeration circuits.
4 Small Appliance Refrigerant Recovery Procedures
A 14-question quiz on safe, compliant recovery procedures for small appliances, including equipment selection, recovery targets, and refrigerant handling.
5 Chiller Service Practice and Verification
Practice chiller recovery, safety checks, endpoint verification, and service documentation. Follow equipment-specific procedures and applicable requirements.
5 Chiller Service Practice and Verification
A practical framework for safely recovering refrigerant from chillers, verifying recovery and dehydration endpoints, troubleshooting problems, and documenting service work.
5 Small Appliance Service and Compliance Workflows
A medium-difficulty quiz on identifying small appliances and applying Section 608 service, recovery, leak-check, and disposal practices.
5 Small Appliance Service and Compliance Workflows
Learn how to diagnose, service, document, and prepare small appliances for disposal while meeting applicable refrigerant recovery and certification requirements.