Timedora
Free Online Flashcard Deck

Evaluating Pollution Controls Free Online Flashcards

Study Evaluating Pollution Controls with 12 free online flashcards. Review key terms, definitions, and concepts with this interactive flashcard deck.

12 cards
01
Front

What options should be considered before selecting an end-of-pipe control?

Back

Start with source reduction, process changes, and reuse or recovery, then consider end-of-pipe controls; screen for feasibility and compare performance, impacts, costs, and compliance.

02
Front

What does a BACT review consider in U.S. air permitting?

Back

A U.S. air-permitting BACT review can identify feasible options, compare their effectiveness, and consider economic, energy, and environmental impacts.

03
Front

Which costs belong in a whole-life comparison of pollution controls?

Back

Include equipment, installation, and engineering, plus recurring costs such as energy, water, chemicals, labor, maintenance, replacement parts, and residuals handling.

04
Front

What should be planned for when a control captures pollution?

Back

Captured pollution may become dust, spent adsorbent, scrubber liquid, sludge, or wastewater. Plan for its quantity, characteristics, handling, costs, and appropriate reuse, treatment, or disposal.

05
Front

How should operating indicators be chosen for control-system monitoring?

Back

Match monitoring to the technology and applicable requirements. Depending on the system, indicators such as pressure drop, temperature, flow, or chemical feed can show proper operation.

06
Front

Why is removal efficiency alone insufficient for comparing controls?

Back

Compare the mass emitted or discharged after control, not just the fraction removed. Account for bypasses, startup and shutdown, variable loads, and downtime.

07
Front

What is a cross-media effect of pollution control?

Back

A control that reduces an air pollutant may transfer some pollution to water or solid waste. Compare resource needs and these cross-media effects rather than treating the air reduction as total elimination.

08
Front

What belongs in a residuals-management plan?

Back

Estimate the residuals’ quantity and characteristics, then include their handling and management costs. Plan for appropriate reuse, treatment, or disposal.

09
Front

What details may a control-system monitoring plan specify?

Back

Depending on the applicable requirements, specify testing frequency, sampling methods, records, and corrective actions; some sources may require direct measurements.

10
Front

What governs permitted wastewater discharges under an NPDES permit?

Back

For wastewater discharges covered by an NPDES permit, permit limits and monitoring conditions govern what may be discharged and how compliance is demonstrated.

11
Front

Which assumptions should be held consistent when comparing control performance?

Back

Use the same assumptions for production rate, operating hours, pollutant loading, and equipment availability so the options are compared on a common basis.

12
Front

How should a selected pollution-control approach be verified over time?

Back

Choose an option that meets applicable requirements and performs reliably, then establish monitoring and maintenance procedures to confirm that performance continues.