When beginning to select an air-pollution control technology, what should engineers assess first?
Air-Pollution Control Systems Online Quiz Questions
Use this free practice quiz with 20 questions to review Air-Pollution Control Systems, test your knowledge, and prepare for your next test or exam.
When comparing candidate air-pollution controls, which considerations should engineers include? Select all that apply.
- A
Required control performance
- B
Reliability
- C
Energy and water needs
- D
Worker safety
- E
The equipment’s color
- F
Secondary wastes
- G
Installation and operating costs
- H
Maintenance needs
Captured pollutants do not simply disappear; residuals may require appropriate recovery or disposal.
- A
True
- B
False
What type of component, if damaged, can reduce the performance of an air-pollution control system?
Captured pollutants do not simply disappear: dust, spent adsorbent, , and reaction products need appropriate recovery or disposal.
Describe how engineers should select, operate, and maintain an air-pollution control system. Include the initial basis for selection, factors to compare, and how to address equipment problems and captured pollutants.
A facility wants to identify control-equipment problems before they lead to sustained emissions. Which approach best supports that goal?
- A
Ignore operating conditions unless emissions become visibly worse.
- B
Monitor operating conditions and inspect the equipment to identify problems early.
- C
Replace the control system immediately without inspecting it.
- D
Focus only on the original purchase price of the equipment.
Which conditions can reduce the performance of air-pollution control equipment? Select all that apply.
- A
Blocked ducts
- B
Damaged filter bags
- C
Poor gas distribution
- D
Worn seals
- E
Depleted adsorbent
- F
Inadequate reagent supply
- G
Routine inspection of equipment
- H
Adequate reagent supply
Once a control system captures pollutants, those pollutants disappear and no further handling is needed.
- A
True
- B
False
What moisture-related characteristic of the gas stream should engineers consider when selecting a control technology?
Which approach best guides the selection of an air-pollution control?
- A
Choose the same control for every source to simplify maintenance.
- B
Match the control to the pollutant and the characteristics of the emission stream.
- C
Choose only by comparing installation costs.
- D
Select the control that produces the most secondary waste.
Once air-pollution control equipment captures a pollutant, the pollutant disappears and requires no further handling.
- A
True
- B
False
What two-word residual from a scrubber may require appropriate recovery or disposal?
Which set of considerations best reflects how engineers compare candidate air-pollution controls?
- A
Compare only the purchase price and choose the lowest-cost unit.
- B
Prioritize pollutant capture while disregarding water needs and secondary wastes.
- C
Compare performance, reliability, resource needs, costs, maintenance, safety, and secondary wastes.
- D
Select equipment based only on the size of its installation area.
Monitoring operating conditions and inspecting control equipment can help identify problems before they cause sustained emissions.
- A
True
- B
False
Name one activity that helps identify equipment problems before they cause sustained emissions.
Which condition can reduce the performance of air-pollution control equipment?
- A
Damaged filter bags
- B
Routine equipment inspection
- C
Appropriate recovery of captured dust
- D
Comparison of water needs during technology selection
After control equipment captures pollutants, what should be done with resulting residuals?
- A
Assume captured material vanishes during normal operation.
- B
Return every residual to the emission stream.
- C
Store all residuals indefinitely without evaluating them.
- D
Arrange appropriate recovery or disposal for captured-pollutant residuals.
When beginning to select air-pollution control equipment, what should engineers do first?
- A
Choose the control with the lowest installation cost, regardless of the pollutant.
- B
Match the control to the pollutant and emission-stream characteristics.
- C
Select the equipment that uses the least water, without considering its performance.
- D
Choose the technology that is easiest to install, regardless of operating conditions.
Which condition can reduce the performance of air-pollution control equipment?
- A
Inspecting equipment regularly.
- B
Monitoring operating conditions.
- C
A damaged filter bag.
- D
Recovering captured dust appropriately.
Related study packs and tools
1 Electrical Quantities and Ohm’s Law
Learn how charge, current, voltage, resistance, power, and energy are related in electric circuits, including how to apply Ohm’s law and interpret worked calculations.
01 Foundations of Materials Science
Review how processing, structure, properties, and performance connect, and how engineering materials are classified and selected.
1 Vectors for Engineering Mechanics
A medium-difficulty quiz on representing vectors, calculating their components and magnitudes, and applying vector operations in engineering mechanics.
02 Atomic Bonding and Crystal Structures
Learn how atomic bonding relates to crystal order, how unit cells and Miller indices describe crystals, and how common metal and ceramic structures differ.
3 The Engineering Design Process
Learn how engineers define a need, explore and select design concepts, build and test prototypes, and use evidence to improve a solution.
04 Mechanical Properties of Materials
A medium-difficulty quiz on how materials respond to stress, deformation, repeated loading, sustained loading, and flaws.
05 Phase Diagrams and Phase Transformations
Learn how phase diagrams describe equilibrium, how solidification and transformations form microstructures, and how heat treatment and cooling control material structure.
06 Metals and Alloys
Review how metal structure, alloy composition, processing, heat treatment, and application requirements shape the properties and uses of engineering metals.
06 Metals and Alloys
Learn how metal structure, composition, processing, and heat treatment shape material properties, and how to select an alloy for an engineering application.
7 Engineering Ethics and Responsibility
Learn how engineers apply professional duties, ethical codes, safety practices, and community considerations to responsible engineering decisions.
08 Polymers
Learn how polymer chain structure, molecular-weight distribution, thermal behavior, and processing methods determine the properties and uses of polymer materials.
10 Materials Selection and Design
A medium-difficulty quiz on applying materials-selection principles, evaluating candidates, and accounting for processing and service requirements.