Timedora
Free Online Flashcard Deck

Structural Stability and Buckling Free Online Flashcards

Study Structural Stability and Buckling with 12 free online flashcards. Review key terms, definitions, and concepts with this interactive flashcard deck.

12 cards
01
Front

How does structural stability differ from strength?

Back

Stability is the ability to maintain equilibrium without uncontrolled movement; strength is the capacity to resist forces without exceeding limits such as yielding or crushing. Both must be considered.

02
Front

What makes a structural load path continuous?

Back

Loads travel from where they act through structural members and connections to the foundations and supporting ground.

03
Front

What is buckling?

Back

Buckling is a loss of stability in which a member or structure changes shape significantly under load, often before the material reaches crushing or yielding strength.

04
Front

What must a brace have to provide its intended restraint?

Back

A brace needs sufficient strength to resist the forces it attracts and stiffness to limit movement; its connections and supporting structure must also be adequate.

05
Front

Why may a partly erected frame need temporary bracing?

Back

A partly erected frame may be vulnerable before its permanent floors, walls, or braces are complete. Temporary bracing or supports may be needed until the permanent system is connected.

06
Front

What does the ideal Euler column relation show about buckling load?

Back

For an ideal, straight, elastic, pin-ended column, Pcr=π2EIL2P_{cr}=\frac{\pi^2EI}{L^2}. The relation shows that greater stiffness or a shorter unsupported length raises the critical load.

07
Front

How do floor diaphragms help resist lateral forces?

Back

Floor and roof diaphragms collect lateral forces and transfer them to vertical bracing or walls, which carry the forces toward the foundations.

08
Front

What stability risk arises before a frame is fully erected?

Back

The frame may be vulnerable before its permanent stabilizing elements are connected, so temporary bracing or supports may be needed during that stage.

09
Front

Why might an installed brace fail to stabilize a member?

Back

A brace that is weak, flexible, poorly connected, or inadequately supported may fail to provide the intended restraint, even if a brace is present.

10
Front

Can a structurally strong frame still be unstable?

Back

A structure can have strong materials and large members yet remain unsafe if its geometry, supports, bracing, or connections do not maintain equilibrium.

11
Front

How do local, member, and global buckling differ?

Back

Local buckling affects a thin cross-section part; member buckling affects an individual member; global buckling involves sway, twist, or loss of the overall system shape.

12
Front

Until when may temporary construction bracing be needed?

Back

Temporary bracing or supports may be necessary until the permanent floors, walls, or braces are connected and the intended stabilizing system is complete.