Timedora

Structural Loads and Their Effects

How structural actions become reactions, internal forces, stresses, and deformation, and why design standards guide load estimates and combinations.

From structural actions to effects

From structural actions to effects

A is an action a structure must resist. Its source helps classify it: a beam’s weight is a permanent load; people or furniture on a floor are use-related loads; and wind acting on a wall is an environmental load. These actions can be represented in different ways, such as forces or pressures, depending on how they act on the structure.

A load may produce support reactions, internal forces, stresses, and deformations. Its effects depend not just on how large it is, but also on where and how it acts and on how the structure is supported. For example, a vertical load on a beam commonly causes bending and shear, while lateral wind can cause a frame to sway or overturn.

Design standards provide procedures for estimating loads and choosing combinations. Requirements depend on the structure, its location, and the applicable code. Engineers evaluate prescribed combinations rather than assuming every possible maximum load happens at the same time.

  • : Effects a load produces in a structure.