Timedora
Free Online Flashcard Deck

Control-Volume Balances Free Online Flashcards

Study Control-Volume Balances with 12 free online flashcards. Review key terms, definitions, and concepts with this interactive flashcard deck.

12 cards
01
Front

What should you identify when defining a control volume?

Back

A control volume is defined by its boundary; identify every inlet, outlet, heat transfer, and work interaction crossing it.

02
Front

Why choose a consistent sign convention?

Back

Choose a consistent sign convention and use it throughout the balance problem.

03
Front

What must be true of total mass flow rates at steady flow?

Back

At steady flow, total inlet and outlet mass flow rates must match.

04
Front

When may a term be removed from an energy balance?

Back

Begin with the general energy balance; omit a term only when neglecting it is justified.

05
Front

How can enthalpies needed in a control-volume balance be found?

Back

Use property data or appropriate relations to determine enthalpies for the states in the balance.

06
Front

What should be checked after writing a control-volume balance?

Back

Check units and verify that the directions assigned to heat and work match the chosen sign convention.

07
Front

What does m˙h(hh,in−hh,out)\dot m_h(h_{h,in}-h_{h,out}) represent?

Back

For one inlet and one outlet on each side, m˙h(hh,in−hh,out)\dot m_h(h_{h,in}-h_{h,out}) is the hot-stream enthalpy decrease rate.

08
Front

How should heat loss to the surroundings affect a two-stream energy balance?

Back

Include heat escaping to the surroundings in the energy balance; do not assume the two streams exchange all their energy with each other.

09
Front

What should be listed before writing the balances?

Back

List the known states and mass flow rates after selecting a consistent sign convention.

10
Front

What should a control-volume sketch show?

Back

Draw and label the control volume, showing every inlet and outlet as well as heat and work interactions.

11
Front

What dimensional check should follow a control-volume calculation?

Back

Check that units are consistent in the balance and in the property values used.

12
Front

What is a practical sequence for setting up a control-volume balance?

Back

Draw and label the control volume, list known information, write the mass balance, then write the energy balance and justify any simplifications.