For a closed system, using the convention that heat into the system and work done by the system are positive, which equation gives the general first-law energy balance for a process?
First Law of Thermodynamics for Closed Systems Online Quiz Questions
Use this free practice quiz with 20 questions to review First Law of Thermodynamics for Closed Systems, test your knowledge, and prepare for your next test or exam.
Select all statements that are correct about closed systems and energy.
- A
A closed system contains a fixed amount of matter; energy may still cross its boundary as heat or work.
- B
Heat and work are properties stored in a closed system.
- C
Internal energy is a property of the system's state.
- D
The change in energy between two states depends on those states, while heat and work generally depend on the process path.
Using the convention that work done by the system is positive, work done on the system is assigned a negative sign.
- A
True
- B
False
A closed system receives 500 kJ of heat and has 100 kJ of work input. If changes in kinetic and potential energy are negligible, what is its change in internal energy? Enter the numerical value in kJ.
Using the convention that heat into the system is positive and work done by the system is positive, heat entering the system is , while work done on the system is .
A closed system receives 35 kJ of heat while doing 10 kJ of work on its surroundings. Changes in kinetic and potential energy are negligible. Using the convention that heat into the system and work done by the system are positive, set up the first-law balance, calculate the change in internal energy, and state whether internal energy increases or decreases.
Which of the following is a property of a closed system's state rather than a description of energy transfer across its boundary?
- A
Heat
- B
Internal energy
- C
Work
- D
The process path
Select all statements that correctly describe the first-law balance for a closed system using heat into the system positive and work done by the system positive.
- A
The general balance for a closed system is Q−W=ΔU+ΔKE+ΔPE.
- B
The general balance for a closed system is Q−W=ΔU, even when kinetic- and potential-energy changes are significant.
- C
If kinetic- and potential-energy changes are negligible, the balance reduces to Q−W=ΔU.
- D
Under the stated convention, work done on the system is positive.
An adiabatic process necessarily is reversible.
- A
True
- B
False
A gas in a closed piston–cylinder expands at constant pressure from 0.10 m3 to 0.20 m3. The pressure is 100 kPa, and boundary work is the only work mode. What is the boundary work done by the gas? Enter the numerical value in kJ.
A closed system receives 500 kJ of heat and has 100 kJ of work input. Neglect changes in kinetic and potential energy. Using heat into the system as positive and work done by the system as positive, what is ΔU, in kJ? Enter the numerical value:
Using the convention that heat into the system is positive and work done by the system is positive, which equation gives the full first-law energy balance for a closed system?
- A
Q−W=ΔE=ΔU+ΔKE+ΔPE
- B
Q+W=ΔE=ΔU+ΔKE+ΔPE
- C
Q−W=ΔU for every process, whether or not kinetic and potential energy change
- D
Q=W for every process
Using the convention that work done by a system is positive, work done on the system has a negative sign. True or false?
- A
True
- B
False
A closed system receives 35 kJ of heat and does 10 kJ of work. Neglect changes in kinetic and potential energy. What is the system’s change in internal energy? Enter the value in kJ.
A closed system receives 500 kJ of heat and has 100 kJ of work input. Neglect changes in kinetic and potential energy. Using heat into the system as positive and work done by the system as positive, what is ΔU?
- A
600 kJ
- B
400 kJ
- C
−600 kJ
- D
−400 kJ
A system has 100 kJ of work input. Under the convention that work done by the system is positive, what is the signed work W? Enter the value in kJ.
Which statement correctly distinguishes heat and work from internal energy in a closed system?
- A
Heat and work are stored properties of the system, while internal energy is an energy transfer across its boundary.
- B
Heat and work are energy transfers across the boundary, while internal energy is a property of the system’s state.
- C
Heat, work, and internal energy are all properties stored in the system.
- D
Internal energy is a transfer across the boundary, and heat and work are properties of the system’s state.
Which description defines a closed system?
- A
A system through whose boundary neither mass nor energy can pass.
- B
A system in which mass crosses the boundary but energy cannot.
- C
A system containing a fixed amount of matter, with energy able to cross its boundary as heat or work.
- D
A system in which mass and energy must both cross the boundary.
A closed system receives 420 kJ of heat and has 70 kJ of work done on it. Neglect changes in kinetic and potential energy. Using the convention that heat into the system and work done by the system are positive, what is ΔU?
- A
350 kJ
- B
490 kJ
- C
−350 kJ
- D
−490 kJ
Which statement describes a closed system in the context of the first law of thermodynamics?
- A
Neither mass nor energy can cross its boundary.
- B
Mass cannot cross its boundary, but energy may cross as heat or work.
- C
Energy cannot cross its boundary, but mass may cross.
- D
Mass and energy must both cross its boundary.
Related study packs and tools
- Study guide
1 Electrical Quantities and Ohm’s Law
Learn how charge, current, voltage, resistance, power, and energy are related in electric circuits, including how to apply Ohm’s law and interpret worked calculations.
- Flashcards
01 Foundations of Materials Science
Review how processing, structure, properties, and performance connect, and how engineering materials are classified and selected.
- Quiz
1 Vectors for Engineering Mechanics
A medium-difficulty quiz on representing vectors, calculating their components and magnitudes, and applying vector operations in engineering mechanics.
- Flashcards
04 Mechanical Properties of Materials
Review how materials respond to forces and deformation, and how strength, fracture, fatigue, creep, and hardness are assessed.
- Quiz
04 Mechanical Properties of Materials
A medium-difficulty quiz on how materials respond to stress, deformation, repeated loading, sustained loading, and flaws.
- Study guide
5 Thermodynamic Cycles and Devices
Learn how thermodynamic cycles transfer energy, how engines and reversed-cycle devices perform, and how the vapor-compression cycle moves heat.
- Flashcards
06 Metals and Alloys
Review how metal structure, alloy composition, processing, heat treatment, and application requirements shape the properties and uses of engineering metals.
- Study guide
06 Metals and Alloys
Learn how metal structure, composition, processing, and heat treatment shape material properties, and how to select an alloy for an engineering application.
- Study guide
7 Engineering Ethics and Responsibility
Learn how engineers apply professional duties, ethical codes, safety practices, and community considerations to responsible engineering decisions.
- Study guide
08 Polymers
Learn how polymer chain structure, molecular-weight distribution, thermal behavior, and processing methods determine the properties and uses of polymer materials.
- Study guide
09 Composite Materials
Learn how composite materials combine constituents, how reinforcement arrangements shape their properties, and how to select them for particular applications.
- Quiz
10 Materials Selection and Design
A medium-difficulty quiz on applying materials-selection principles, evaluating candidates, and accounting for processing and service requirements.