What does steady state mean for a control volume?
At steady state, energy does not accumulate in the control volume, so . Heat, work, and mass may still cross its boundary.
Study Thermodynamic Energy Balances and Turbines with 12 free online flashcards. Review key terms, definitions, and concepts with this interactive flashcard deck.
What does steady state mean for a control volume?
At steady state, energy does not accumulate in the control volume, so dtdECV=0. Heat, work, and mass may still cross its boundary.
What sign convention gives ΔE=Q−W for a closed system?
For a closed system, ΔE=Q−W: heat into the system and work done by the system are positive.
What power unit results from multiplying kg/s by kJ/kg?
Because (kg/s)(kJ/kg)=kJ/s=kW, the mass-flow rate and specific enthalpy give a power rate.
A steady adiabatic turbine has m˙=2.0 kg/s, h1=3200, and h2=2600 kJ/kg. Find its shaft power.
With negligible kinetic- and potential-energy changes, W˙out=m˙(h1−h2)=(2.0)(3200−2600)=1200 kW.
What should you identify before choosing an energy-balance equation?
Define the boundary and identify the inlets and outlets first; then choose the balance that matches whether mass crosses it.
A gas receives 500 kJ of heat and does 180 kJ of work. What is ΔU?
Using ΔU=Q−W, the internal energy increases by 500−180=320 kJ.
What forms of energy does flowing mass carry into or out of a control volume?
Flowing mass carries enthalpy, kinetic energy, and potential energy across a control-volume boundary.
A turbine's actual work is 600 kJ/kg; ideal isentropic work is 700 kJ/kg at the same inlet state and outlet pressure. Find ηt.
For the same inlet state and outlet pressure, ηt=700600≈0.857, or about 85.7%.
When does a turbine’s steady-flow work output reduce to m˙(h1−h2)?
For a single-inlet, single-outlet adiabatic turbine with negligible kinetic- and potential-energy changes, W˙out=m˙(h1−h2).
What distinguishes a closed system from a control volume?
A closed system has no mass crossing its boundary, although heat and work may cross.
What energy transfers must a control-volume balance account for?
The control-volume balance includes energy carried by inlet and outlet mass, as well as heat, shaft work, and energy accumulation.
How do you interpret the sign of calculated work output?
A positive work-out result means the device produces work; a negative result means work must be supplied to it.
Learn how charge, current, voltage, resistance, power, and energy are related in electric circuits, including how to apply Ohm’s law and interpret worked calculations.
Review how processing, structure, properties, and performance connect, and how engineering materials are classified and selected.
A medium-difficulty quiz on representing vectors, calculating their components and magnitudes, and applying vector operations in engineering mechanics.
Review how materials respond to forces and deformation, and how strength, fracture, fatigue, creep, and hardness are assessed.
A medium-difficulty quiz on how materials respond to stress, deformation, repeated loading, sustained loading, and flaws.
Learn how thermodynamic cycles transfer energy, how engines and reversed-cycle devices perform, and how the vapor-compression cycle moves heat.
Review how metal structure, alloy composition, processing, heat treatment, and application requirements shape the properties and uses of engineering metals.
Learn how metal structure, composition, processing, and heat treatment shape material properties, and how to select an alloy for an engineering application.
Learn how engineers apply professional duties, ethical codes, safety practices, and community considerations to responsible engineering decisions.
Learn how polymer chain structure, molecular-weight distribution, thermal behavior, and processing methods determine the properties and uses of polymer materials.
Learn how composite materials combine constituents, how reinforcement arrangements shape their properties, and how to select them for particular applications.
A medium-difficulty quiz on applying materials-selection principles, evaluating candidates, and accounting for processing and service requirements.