Timedora
Free Practice Quiz Question List

Thermodynamic Energy Balances and Turbine Performance Online Quiz Questions

Use this free practice quiz with 20 questions to review Thermodynamic Energy Balances and Turbine Performance, test your knowledge, and prepare for your next test or exam.

20 questions
01
Choose one
1 point

Which sequence is the most reliable general method for solving an energy-balance problem?

  1. A

    Substitute all values first, then decide whether mass crosses the boundary.

  2. B

    Define the boundary and transfers, choose the appropriate balance, state assumptions, check units, and interpret the result.

  3. C

    Assume steady state means no heat, work, or mass can cross the boundary.

  4. D

    Combine energy and power values directly, then interpret the sign of the result.

02
Choose all
1 point

Select all statements that correctly describe a control-volume energy balance and its steady-flow simplifications.

  1. A

    At steady state, energy does not accumulate in the control volume, although heat, work, and mass may still cross its boundary.

  2. B

    Flowing mass carries energy as enthalpy, kinetic energy, and potential energy.

  3. C

    For an adiabatic turbine with negligible speed and elevation changes, the work-output rate is given by the mass-flow rate multiplied by the inlet-to-outlet enthalpy drop.

  4. D

    Energy carried into a control volume by flowing mass is classified as shaft work.

  5. E

    Setting the energy-accumulation rate to zero means that all heat, work, and mass flow rates must be zero.

03
True or false
1 point

A steady, adiabatic turbine has one inlet and one outlet. Its mass-flow rate is 2.0 kg/s2.0\ \mathrm{kg/s}, its inlet and outlet enthalpies are 3200 kJ/kg3200\ \mathrm{kJ/kg} and 2600 kJ/kg2600\ \mathrm{kJ/kg}, and kinetic- and potential-energy changes are negligible. For the same inlet state and outlet pressure, the ideal isentropic work is 700 kJ/kg700\ \mathrm{kJ/kg}. True or false: the actual shaft power is 1200 kW1200\ \mathrm{kW}, and the isentropic efficiency is approximately 85.7%85.7\%.

  1. A

    True

  2. B

    False

04
Written response
1 point

A closed system receives 500 kJ500\ \mathrm{kJ} of heat and does 180 kJ180\ \mathrm{kJ} of work. Assume changes in bulk speed and elevation are negligible. What is the system's internal-energy change? Give your answer in kJ.

05
Fill in the blank
1 point

When mass does not cross the system boundary, choose a . With heat into the system and work done by the system positive, write the energy balance as .

06
Open ended
1 point

A closed system receives 500 kJ500\ \mathrm{kJ} of heat and does 180 kJ180\ \mathrm{kJ} of work. Assume changes in bulk speed and elevation are negligible. State the applicable first-law balance and calculate the internal-energy change, including its sign and physical meaning.

07
Choose one
1 point

A steady, adiabatic turbine has negligible kinetic- and potential-energy changes. Its inlet and outlet enthalpies are 3200 kJ/kg3200\ \mathrm{kJ/kg} and 2600 kJ/kg2600\ \mathrm{kJ/kg}. For the same inlet state and outlet pressure, an ideal isentropic expansion produces 700 kJ/kg700\ \mathrm{kJ/kg} of work. What is the turbine's isentropic efficiency?

  1. A

    85.7%

  2. B

    14.3%

  3. C

    1200 kW

  4. D

    600%

08
Choose all
1 point

Select all statements that correctly describe energy carried by flowing mass and steady state in a control volume.

  1. A

    Enthalpy is defined as h=u+pvh=u+pv and includes internal energy and flow work.

  2. B

    The energy carried by flowing mass includes enthalpy, kinetic energy, and potential energy.

  3. C

    At steady state, the energy-accumulation rate is zero, but heat, work, and mass may still cross the boundary.

  4. D

    At steady state, mass cannot enter or leave the control volume.

  5. E

    Energy carried by flowing mass is heat transfer across the control surface.

09
True or false
1 point

True or false: At steady state, there is no energy accumulation in a control volume, so heat, work, and mass flow across its boundary must all be zero.

  1. A

    True

  2. B

    False

10
Written response
1 point

A steady, adiabatic turbine has a mass-flow rate of 2.0 kg/s2.0\ \mathrm{kg/s}, inlet enthalpy 3200 kJ/kg3200\ \mathrm{kJ/kg}, and outlet enthalpy 2600 kJ/kg2600\ \mathrm{kJ/kg}. Assume one inlet and one outlet and negligible kinetic- and potential-energy changes. What is its actual shaft power? Give your answer in kW.

11
Fill in the blank
1 point

At steady state, energy does not in a control volume, although heat, work, and mass may still cross its boundary.

12
Choose one
1 point

A closed system receives 500 kJ of heat and does 180 kJ of work. If changes in bulk speed and elevation are negligible, what is its internal-energy change?

  1. A

    320 kJ

  2. B

    680 kJ

  3. C

    -320 kJ

  4. D

    -680 kJ

13
True or false
1 point

At steady state, a control volume has no energy accumulation, so no heat, work, or mass can cross its boundary.

  1. A

    True

  2. B

    False

14
Choose one
1 point

Which statement correctly checks the units when a mass flow rate is multiplied by a specific enthalpy?

  1. A

    A mass flow rate in kg/s multiplied by a specific enthalpy in kJ/kg gives kW.

  2. B

    A total energy in kJ can be added directly to a power in kW.

  3. C

    A mass flow rate in kg/s multiplied by a specific enthalpy in kJ/kg gives kJ.

  4. D

    A mass flow rate in kg/s multiplied by a specific enthalpy in kJ/kg gives kJ/s².

15
Written response
1 point

A closed system receives 500 kJ of heat and does 180 kJ of work. Assuming changes in bulk speed and elevation are negligible, what is its internal-energy change?

16
Choose one
1 point

Which forms of energy does flowing mass carry across a control-volume boundary?

  1. A

    Enthalpy, kinetic energy, and potential energy

  2. B

    Heat and shaft work only

  3. C

    Internal energy only

  4. D

    Enthalpy only

17
Written response
1 point

Using the convention that work out is positive, what does a negative work-out result mean for a device?

18
Choose one
1 point

A steady, adiabatic turbine has an enthalpy drop of 600 kJ/kg600\ \mathrm{kJ/kg}. For the same inlet state and outlet pressure, its ideal isentropic work output is 700 kJ/kg700\ \mathrm{kJ/kg}. What is the turbine’s isentropic efficiency?

  1. A

    85.7%

  2. B

    116.7%

  3. C

    42.9%

  4. D

    14.3%

19
Choose one
1 point

For a control volume operating at steady state, which statement is correct?

  1. A

    No heat, work, or mass can cross the boundary.

  2. B

    Energy does not accumulate, but heat, work, and mass may still cross the boundary.

  3. C

    Mass may cross the boundary, but heat and work cannot.

  4. D

    Energy accumulates at a constant nonzero rate.

20
Choose one
1 point

A turbine’s mass flow rate is 3 kg/s3\ \mathrm{kg/s}, and its enthalpy drop is 400 kJ/kg400\ \mathrm{kJ/kg}. Assuming the simplified turbine balance applies, what is its work-output rate, with the correct units?

  1. A

    1200 kJ1200\ \mathrm{kJ}

  2. B

    1200 kJ/kg1200\ \mathrm{kJ/kg}

  3. C

    1200 kW1200\ \mathrm{kW}

  4. D

    1200 kg/s1200\ \mathrm{kg/s}