Thermodynamic Energy, Heat, Work, and the First Law
Learn to distinguish energy stored in a thermodynamic system from energy transferred across its boundary, then use the closed-system first law to account for those transfers.
The System and Its Stored Energy
Choose the system first
A is the substance or region selected for study. Everything outside that selection is the surroundings. The boundary separating them may be a physical surface or an imaginary one. Defining the system makes it clear which energy is being considered as stored and where energy could cross the boundary.
Three contributions to stored energy
A system’s energy can include , kinetic energy, and potential energy:
is microscopic energy: it includes the random motion of particles and energy associated with their interactions. Temperature is related to microscopic motion, but also depends on the substance and its state.
Kinetic energy is energy of the system’s motion as a whole. For a mass moving at speed , .
Potential energy is energy associated with position in a force field. For gravitational potential energy, , where height is measured relative to a chosen reference.
Thus, for many basic applications,
When the simpler view is enough
If the system is a stationary, closed container, changes in its bulk motion and position may be negligible. In that case, the change in total energy is mainly a change in . This is an approximation tied to the circumstances—not a claim that kinetic and potential energy are never part of a system’s energy.
How Energy Crosses the Boundary
Transfer is not storage
and describe energy crossing the system boundary during a process; neither is a form of energy stored in the system. Once transferred, energy can change the system’s internal, kinetic, or potential energy. The distinction is about how energy crosses the boundary: transfer is due to a temperature difference, while transfer occurs through another organized interaction.
Common -transfer modes
Conduction transfers energy through matter by microscopic interactions, without bulk movement of the material. For example, a metal spoon warms in hot tea.
Convection transfers energy between a surface and a moving fluid, involving the fluid’s bulk motion. Warm air rising above a heater illustrates this mode.
Thermal radiation transfers energy by electromagnetic waves and does not require a material medium. Sunlight warming a surface is an example.
Common -transfer modes
Boundary (pressure–volume) occurs when a boundary moves. For a gas expanding quasi-statically, the done by the gas is . With the convention that done by the system is positive, expansion gives positive by the gas.
Shaft transfers energy through a rotating shaft, as in a turbine or mixer.
Electrical transfers energy through electrical forces, as when current powers a device inside the system.
The sign of depends on the convention being used. Here, the stated positive sign for expansion means the system is doing on its surroundings; it does not mean that is energy stored inside the gas.
Balancing Energy in a
Apply the balance with its sign convention
For a , no mass crosses the boundary. Use the convention that entering the system is positive and done by the system is positive. The first-law balance is
where is net transferred into the system and is net done by it. is subtracted because, under this convention, done by the system transfers energy out of it.
Worked example: an expanding gas
A gas receives of and does of while expanding. Both values are positive under the stated convention: enters, and the gas does on its surroundings. Substituting into the balance,
So the gas’s total stored energy increases by . The balance gives the change in total energy; it does not, on its own, say how that change is divided among internal, kinetic, and potential energy.
Transfers versus state change
The amounts of and depend on the process by which the system changes. By contrast, the change in stored energy depends only on the initial and final states. Different processes can therefore involve different and transfers while giving the same energy change between the same states.
: The energy-balance principle relating a system’s energy change to and transfers.