Timedora
Free Online Flashcard Deck

Shallow-Foundation Design Free Online Flashcards

Study Shallow-Foundation Design with 12 free online flashcards. Review key terms, definitions, and concepts with this interactive flashcard deck.

12 cards
01
Front

What is the overall sequence for shallow-foundation design?

Back

Start by establishing loads and performance criteria, then investigate the site and select the foundation type and founding level. Follow with geotechnical checks, structural design, and construction controls.

02
Front

Which shallow-foundation types commonly support columns, walls, or whole structures?

Back

Isolated spread footings support columns, strip footings support walls, and mats support many columns or an entire structure.

03
Front

What does ultimate bearing capacity, qultq_{ult}, represent?

Back

Ultimate bearing capacity, qultq_{ult}, is the pressure associated with failure of the supporting soil.

04
Front

What is settlement, and what are its main components?

Back

Settlement is downward movement caused by soil deformation under load. It can include immediate settlement, consolidation settlement, and secondary compression.

05
Front

What should a site investigation establish for shallow-foundation design?

Back

Investigate soil layering, groundwater, and properties related to strength and compressibility. Account for spatial variability and possible weak or compressible layers.

06
Front

What is differential settlement, and why does it matter?

Back

Differential settlement is the difference in movement between parts of a structure. It can distort frames, crack walls, or damage services, even when total settlement is modest.

07
Front

When are shallow foundations suitable?

Back

They are suitable when near-surface soils can support the loads without unacceptable shear failure or settlement.

08
Front

How can a high water table affect bearing-capacity analysis?

Back

A high water table can reduce the effective soil weight used in bearing-capacity analysis, affecting the calculated resistance.

09
Front

How is shear-based allowable pressure estimated in the traditional approach?

Back

In the traditional allowable-stress approach, the shear-based allowable pressure is qallow,shear=qultFSq_{allow,shear}=\frac{q_{ult}}{FS}, with FSFS selected under applicable design criteria.

10
Front

What structural checks are needed for a shallow footing?

Back

Verify the concrete footing and reinforcement for bending, one-way shear, punching shear, and load transfer from the supported element.

11
Front

What construction controls help preserve design bearing conditions?

Back

Confirm exposed bearing soil matches the design assumptions, remove or treat unsuitable material as required, and manage water to protect the bearing surface.

12
Front

What is a consequence of reducing effective footing width under eccentric load?

Back

The reduced effective area raises average pressure. Bearing analysis must also account for overturning and sliding stability.