Timedora
Free Practice Quiz Question List

Geotechnical Soil Strength and Testing Online Quiz Questions

Use this free practice quiz with 20 questions to review Geotechnical Soil Strength and Testing, test your knowledge, and prepare for your next test or exam.

20 questions
01
Choose one
1 point

Which statement best describes the cone penetration test (CPT/CPTu) and its site-characterization value?

  1. A

    A sampler is driven at the base of a borehole, and its blow count directly measures undrained shear strength.

  2. B

    A cone is pushed into the ground, and penetration resistance is measured along a continuous profile.

  3. C

    A vane is rotated in sand to provide a direct estimate of drained strength.

  4. D

    A pocket penetrometer replaces representative field investigation and calibrated testing.

02
Choose all
1 point

Select all statements that are correct about effective stress and drained or short-term undrained strength.

  1. A

    For saturated soil in the simple case, effective stress is σ′=σ−u\sigma' = \sigma - u.

  2. B

    A rise in pore-water pressure necessarily increases the effective stress carried by the soil skeleton.

  3. C

    The drained Mohr–Coulomb model relates failure shear stress to effective normal stress, effective cohesion, and effective friction angle.

  4. D

    For rapid loading of saturated, low-permeability clay, engineers may use undrained shear strength in a total-stress analysis.

  5. E

    Using ϕu≈0\phi_u \approx 0 in a simplified undrained model proves that effective-stress friction disappears.

03
True or false
1 point

Residual strength is the lower resistance that may develop after large displacement along an established shear surface.

  1. A

    True

  2. B

    False

04
Written response
1 point

What is the geotechnical term for the trace of how a soil element’s stress state changes as it is loaded?

05
Fill in the blank
1 point

In a CU triaxial test, the specimen is first and then sheared .

06
Open ended
1 point

Explain how pore-water pressure affects effective stress and available shear resistance in saturated soil. Then distinguish the drained Mohr–Coulomb strength model from the practical undrained-strength description used for rapid loading of saturated, low-permeability clay.

07
Choose one
1 point

Which statement best describes the field vane shear test and one of its important suitability limits?

  1. A

    It is primarily used in sand to determine drained friction angle.

  2. B

    It measures a continuous penetration-resistance profile and identifies layering.

  3. C

    It is rotated in soft cohesive soil to estimate undrained shear strength, but may be unsuitable for sand or certain clays.

  4. D

    It directly provides a reliable strength value without interpretation limits or uncertainty.

08
Choose all
1 point

Select all statements that correctly describe peak, softened, or residual strength, or volume-change behavior during saturated undrained shearing.

  1. A

    Peak strength is the maximum resistance mobilized during shearing.

  2. B

    Strain softening means resistance increases after the peak.

  3. C

    Residual strength may develop after large displacement along an established shear surface.

  4. D

    In saturated undrained conditions, a tendency to contract can raise pore pressure and reduce effective stress.

  5. E

    In saturated undrained conditions, dilation necessarily raises pore pressure and reduces effective stress.

09
True or false
1 point

A triaxial-compression test alone may not capture all the stress responses in a potential failure zone beneath an embankment.

  1. A

    True

  2. B

    False

10
Written response
1 point

What is the full name or standard abbreviation of the triaxial test in which a specimen is consolidated and sheared slowly enough for excess pore pressure to dissipate, allowing drained behavior to be determined?

11
Choose one
1 point

Which laboratory test consolidates the specimen before undrained shearing and can use pore-pressure measurements for effective-stress interpretation?

  1. A

    UU triaxial test

  2. B

    CU triaxial test

  3. C

    CD triaxial test

  4. D

    Unconfined compression test

12
True or false
1 point

True or false: In the simplified total-stress model for short-term loading of saturated clay, using ϕu≈0\phi_u \approx 0 means that effective-stress friction has disappeared.

  1. A

    True

  2. B

    False

13
Written response
1 point

Which field test uses a rotating vane in soft cohesive soil to estimate undrained shear strength? Enter the test name.

14
Choose one
1 point

Which statement best describes the common effective-stress path response of normally consolidated clay during undrained shearing?

  1. A

    During drained shearing, water cannot escape quickly and positive excess pore pressure shifts the path toward lower effective stress.

  2. B

    During undrained shearing, normally consolidated clay commonly develops negative excess pore pressure and shifts toward higher effective stress.

  3. C

    During undrained shearing, normally consolidated clay commonly develops positive excess pore pressure and shifts toward lower effective stress.

  4. D

    The effective-stress path is independent of drainage conditions.

15
True or false
1 point

True or false: In a UU triaxial test, the specimen is consolidated under the test confinement before undrained shearing.

  1. A

    True

  2. B

    False

16
Written response
1 point

Which clay condition commonly develops positive excess pore pressure during undrained shearing? Enter the clay condition in three words.

17
Choose one
1 point

Which field test provides a continuous profile that helps identify soil layering as penetration resistance is measured?

  1. A

    CPT

  2. B

    SPT

  3. C

    Field vane shear

  4. D

    Pocket penetrometer

18
Choose one
1 point

Which equation is the common drained Mohr–Coulomb model for shear stress at failure?

  1. A

    σ′=σ−u\sigma' = \sigma - u

  2. B

    τf=c′+σn′tan⁡ϕ′\tau_f = c' + \sigma_n'\tan\phi'

  3. C

    q=(σ1−σ3)/2q = (\sigma_1 - \sigma_3)/2

  4. D

    p′=(σ1′+2σ3′)/3p' = (\sigma_1' + 2\sigma_3')/3

19
Choose one
1 point

Which laboratory test consolidates the specimen first, shears it without drainage, and can use measured pore pressure for effective-stress interpretation?

  1. A

    Unconsolidated-undrained (UU) triaxial test

  2. B

    Consolidated-undrained (CU) triaxial test

  3. C

    Consolidated-drained (CD) triaxial test

  4. D

    Unconfined compression test

20
Choose one
1 point

A landslide reactivates along an established shear surface after substantial movement. Which strength condition may govern its resistance?

  1. A

    Peak strength, the maximum resistance mobilized during shearing

  2. B

    Strain-softened strength, the resistance after it decreases from the peak

  3. C

    Residual strength, the lower resistance after large displacement on an established shear surface

  4. D

    Drained strength, the resistance measured when excess pore pressure dissipates