How can rainfall reduce the stability of a soil slope?
Geotechnical Risk and Ground Engineering Online Quiz Questions
Use this free practice quiz with 20 questions to review Geotechnical Risk and Ground Engineering, test your knowledge, and prepare for your next test or exam.
Which items should be identified to organize a geotechnical risk assessment? Select all that apply.
- A
The ground hazard
- B
The people, structures, or work exposed
- C
The consequences if the hazard occurs
- D
The assumption that investigation eliminates all uncertainty
- E
The construction schedule, regardless of ground conditions
Geophysical methods can help trace changes between exploration points, but generally need interpretation alongside direct investigation.
- A
True
- B
False
A possible slope-stabilization measure that improves the control of water is improving .
A proposed road embankment crosses soft clay. Explain how an investigation could build a ground model relevant to the project, and how that model could inform construction decisions.
During construction, workers encounter groundwater conditions that differ from the ground model. What is the most appropriate response?
- A
Continue without review because the investigation eliminated uncertainty.
- B
Review the ground model and change the work if needed.
- C
Ignore the observation unless it causes immediate damage.
- D
Replace the ground model with the construction schedule.
Which of the following are possible slope-stabilization measures? Select all that apply.
- A
Flattening the slope
- B
Improving drainage
- C
Removing material near the crest
- D
Adding support near the toe
- E
Using reinforcement such as soil nails
- F
Assuming investigation has eliminated all uncertainty
A factor of safety guarantees that a slope cannot fail.
- A
True
- B
False
What ground-improvement method applies a temporary surcharge to increase stress in compressible soil?
In soft clay treatment, preloading applies a to compressible soil, while vertical drains .
Which approach best supports building a ground model relevant to a project's performance requirements?
- A
Use laboratory test results alone and assume they represent the entire site.
- B
Combine field observations, test results, geology, and groundwater data, and state assumptions and uncertainties.
- C
Rely only on geophysical data to define every soil layer.
- D
Collect samples without relating the investigation to the project’s performance requirements.
A factor of safety guarantees that a slope cannot fail.
- A
True
- B
False
In a geotechnical risk assessment, what term describes the people, structures, or work that may be affected by a ground hazard?
A slope's instability is associated with groundwater and seepage. Which listed measure most directly addresses that cause?
- A
Add more load near the crest.
- B
Remove support at the toe.
- C
Improve drainage.
- D
Stop monitoring groundwater.
What is the name of the ratio of resisting to driving effects for a specified slope analysis?
Which ground-improvement approach can speed consolidation in compressible soft clay by increasing stress and shortening the path for water to escape?
- A
Dynamic compaction alone.
- B
Preloading with vertical drains.
- C
Lightweight fill alone.
- D
Grouting to fill voids.
What two-word term describes the risk that remains to be managed because geotechnical investigation cannot eliminate all uncertainty?
After a slope-stabilization measure is implemented, which action helps determine whether the slope is responding as anticipated?
- A
Monitor slope movement and groundwater.
- B
Assume the stabilization measure has worked without checking.
- C
Add loading near the crest.
- D
Remove support at the toe.
A project team is assessing the risk of a potentially unstable slope near an active work area. Which set of factors should it identify to organize the geotechnical risk assessment?
- A
Identify the ground hazard, who or what is exposed, and the consequences if the hazard occurs.
- B
List every soil property, assume the investigation removes all uncertainty, and proceed without monitoring.
- C
Record the construction schedule, site access, and project cost, without assessing possible harm.
- D
Identify the ground hazard and select a design measure, without considering exposure or consequences.
Groundwater and seepage have contributed to instability on a slope. Which response best addresses this cause and helps determine whether the slope is responding as intended?
- A
Add loading near the crest and stop checking groundwater.
- B
Improve drainage and monitor slope movement and groundwater.
- C
Remove support at the toe and rely on a one-time visual inspection.
- D
Flatten the slope without considering the water-related cause or monitoring the result.
Related study packs and tools
- Study guide
1 Electrical Quantities and Ohm’s Law
Learn how charge, current, voltage, resistance, power, and energy are related in electric circuits, including how to apply Ohm’s law and interpret worked calculations.
- Flashcards
01 Foundations of Materials Science
Review how processing, structure, properties, and performance connect, and how engineering materials are classified and selected.
- Quiz
1 Vectors for Engineering Mechanics
A medium-difficulty quiz on representing vectors, calculating their components and magnitudes, and applying vector operations in engineering mechanics.
- Quiz
02 Atomic Bonding and Crystal Structures
A medium-difficulty quiz on atomic bonding, crystal structures, unit cells, and crystallographic notation. Questions progress from interpreting individual properties to applying and comparing structural concepts.
- Study guide
02 Atomic Bonding and Crystal Structures
Learn how atomic bonding relates to crystal order, how unit cells and Miller indices describe crystals, and how common metal and ceramic structures differ.
- Quiz
04 Mechanical Properties of Materials
A medium-difficulty quiz on how materials respond to stress, deformation, repeated loading, sustained loading, and flaws.
- Flashcards
06 Metals and Alloys
Review how metal structure, alloy composition, processing, heat treatment, and application requirements shape the properties and uses of engineering metals.
- Study guide
06 Metals and Alloys
Learn how metal structure, composition, processing, and heat treatment shape material properties, and how to select an alloy for an engineering application.
- Study guide
7 Engineering Ethics and Responsibility
Learn how engineers apply professional duties, ethical codes, safety practices, and community considerations to responsible engineering decisions.
- Study guide
08 Polymers
Learn how polymer chain structure, molecular-weight distribution, thermal behavior, and processing methods determine the properties and uses of polymer materials.
- Study guide
09 Composite Materials
Learn how composite materials combine constituents, how reinforcement arrangements shape their properties, and how to select them for particular applications.
- Quiz
10 Materials Selection and Design
A medium-difficulty quiz on applying materials-selection principles, evaluating candidates, and accounting for processing and service requirements.