Timedora
Free Online Flashcard Deck

Soil Mechanics and Classification Free Online Flashcards

Study Soil Mechanics and Classification with 12 free online flashcards. Review key terms, definitions, and concepts with this interactive flashcard deck.

12 cards
01
Front

How is porosity related to void ratio?

Back

Porosity is the void volume divided by total volume: n=VvV=e1+en = \frac{V_v}{V} = \frac{e}{1+e}.

02
Front

What is residual soil, and what can influence its properties?

Back

Residual soil forms in place through decomposition of its parent material; its properties may vary with weathering and reflect the original rock structure.

03
Front

What consistency transition does the liquid limit mark?

Back

The liquid limit marks the boundary between liquid and plastic behavior in remolded fine-grained soil.

04
Front

How do the common applications of USCS and AASHTO differ?

Back

USCS is widely used in geotechnical engineering; AASHTO is often used for highway and subgrade applications. Their groupings are not interchangeable in every case.

05
Front

Can soil classification replace tests of strength or compressibility for design?

Back

No. Classification and index tests do not replace strength, compressibility, or permeability tests when those properties are needed for design.

06
Front

For saturated soil, how are void ratio, water content, and specific gravity related?

Back

For saturated soil, Sr=1S_r=1, so e=wGse=wG_s, with water content ww expressed as a decimal.

07
Front

Why might similarly classified soils still behave differently?

Back

Soils with similar classifications may still differ in structure, layering, mineralogy, or depositional history, so classification is not a complete account of ground behavior.

08
Front

What No. 200 sieve criterion separates coarse- from fine-grained soil in USCS?

Back

In USCS, soil is coarse-grained when more than half its dry mass is retained on the No. 200 sieve; it is fine-grained when more than half passes.

09
Front

Which agents deposit alluvium, loess, and till, respectively?

Back

Alluvium is deposited by water, loess by wind, and till by glacial ice.

10
Front

What does D10D_{10} represent on a gradation curve?

Back

D10D_{10} is the particle size for which 10% of the sample is finer; it is also called the effective size.

11
Front

How is plasticity index calculated, and what does a larger value indicate?

Back

The plasticity index is PI=LL−PLPI = LL - PL. A larger PIPI indicates a wider water-content range over which the soil is plastic.

12
Front

In USCS coarse-soil symbols, what do W, P, M, and C denote?

Back

For coarse soils, USCS uses W for well graded, P for poorly graded, M for silty fines, and C for clayey fines.