Timedora
Free Online Flashcard Deck

Soil Compaction, Consolidation, and Settlement Free Online Flashcards

Study Soil Compaction, Consolidation, and Settlement with 12 free online flashcards. Review key terms, definitions, and concepts with this interactive flashcard deck.

12 cards
01
Front

How is primary settlement estimated for normally consolidated clay?

Back

For normally consolidated clay, estimate primary settlement with Sc=CcH1+e0log⁡10(σ0′+Δσ′σ0′)S_c=\frac{C_cH}{1+e_0}\log_{10}\left(\frac{\sigma'_0+\Delta\sigma'}{\sigma'_0}\right), using layer thickness, compression index, initial void ratio, and effective-stress change.

02
Front

What do the peak and its water content represent on a Proctor compaction curve?

Back

The curve’s peak is the maximum dry unit weight; the water content at that peak is the optimum water content for the specified test effort.

03
Front

What causes consolidation in saturated soil?

Back

Consolidation is time-dependent compression as excess pore-water pressure dissipates and water drains from saturated or nearly saturated soil. The void ratio decreases and settlement develops.

04
Front

When does secondary compression occur, and where can it be especially important?

Back

Secondary compression, or creep, continues after primary consolidation is substantially complete. It is especially important in organic soils and peat.

05
Front

How does differential settlement differ from total settlement?

Back

Total settlement is the sum of relevant settlement components over the design life. Differential settlement is unequal movement and can be more damaging because it may crack walls, distort frames, or disrupt utilities.

06
Front

How does mechanical compaction densify soil?

Back

Compaction is deliberate densification using mechanical energy. It mainly reduces air-filled voids and generally increases soil strength and stiffness.

07
Front

Which compaction methods often suit granular and plastic cohesive soils?

Back

Vibration is often effective for granular soils, while kneading equipment is commonly used for plastic cohesive soils.

08
Front

How do you estimate time for primary consolidation?

Back

Use t=TvHd2cvt=\frac{T_vH_d^2}{c_v}, where TvT_v is the time factor, HdH_d is the longest drainage path, and cvc_v is the coefficient of consolidation.

09
Front

Why compact soil in lifts, and what field factors affect achieved density?

Back

Compact in successive lifts because equipment affects only limited depth at a time. Adjust moisture to the specified range; lift thickness, moisture, equipment, and number of passes all influence achieved density.

10
Front

What distinguishes compaction from consolidation?

Back

Compaction uses mechanical energy and mainly reduces air-filled voids. Consolidation is time-dependent compression as water drains from saturated or nearly saturated soil.

11
Front

How can settlement plates and piezometers support construction decisions?

Back

Settlement plates track ground movement, while piezometers measure pore-water pressure. Comparing observations with predictions can guide staged loading and decisions about construction timing.

12
Front

How does stress transfer during consolidation of low-permeability saturated soil?

Back

Just after loading, pore water may carry much of the added stress. As drainage proceeds, stress transfers to the soil skeleton, the void ratio decreases, and settlement develops.